Making (planting) nets Determining the parameters of nets for specific types of fishing Buy a ready-made net or make it yourself - everyone decides this question for themselves. About twenty or thirty years ago, when network tools could only be bought under the counter and for

Determining the parameters of nets for specific types of fishing Whether you buy a ready-made net or make it yourself - everyone decides this question for themselves. Twenty or thirty years ago, when network tools could only be bought under the counter and for a lot of money, they were

Methods of installing networks Most of the networks are installed from boats, boats and other watercraft. It can be installed either by two people (one rows, the other casts the net), or alone - the catcher takes turns either rowing with oars or sending the tackle overboard. Second method

Choosing a place to install nets The most important and most difficult thing in fishing with nets is to choose the right place to install them. This statement is especially true on large bodies of water - on a small lake or on a narrow river you can quickly find it by trial and error.

Knitting nets for fishing traps It is not difficult to purchase hems or tops or net materials suitable for their manufacture in large cities, but in remote areas it can be difficult to purchase them. Small tackle can sometimes be made from scrap materials

Types of nets, their design and components In the central, most densely populated regions of Russia, amateur net fishing is practically undeveloped: in some places it is prohibited, in others obtaining permission is associated with a disproportionate amount of time or money... Moreover, installation

Landing of nets For planting, a landing thread wound on a shuttle is used. The correct landing of the net begins with this very winding... And the wrong one too. If the shuttle is not rotated around its vertical axis, as shown in Fig. 57 – one turn for each wound on

Methods for installing networks Installing networks in winter, under ice, is a very labor-intensive task. A mine is cut in the ice with an ice pick, and holes are drilled from it in a line at a distance of 2–3 m from one another. Then a pole with a rope tied to its end is lowered into the lane (the length of the pole is 0.5–0.8 m

Fire safety of intra-house power supply networks Ensuring fire safety of electrical installations and preventing emergency conditions in electrical networks are extremely important. Average number of fires in the residential sector due to electrical causes

Design In Fig. Figures 7.24 and 7.25 show an exploded view of the Schlage Primus cylinders. They have six pins and are precision engineered and manufactured to very tight tolerances. The cylinders are machined so that a side rod and a set of five

​Similar articles​ ​Have a nylon thread binding.​ The shuttle thread is attached to the next marking on the cord. ​The cell size depends on the size of the fish.​​The next component is the material. The material can be monofilament fishing line or thick thread. It is clear that there must be a lot of fishing line. For this, fishing line is purchased in reels. The thinner the line, the more catchy the net, but also the less durable. A thin line cuts into the body of the fish and prevents it from escaping. The line should be blue or dark gray, invisible to the water, so that the fish does not notice it, although at a depth of more than 5 meters the color is no longer distinguishable.​

Instructions

• ​Pig's hoof knot with a safety loop placed backwards​​The photo below shows a safety loop made over a pig's hoof. There is a small knot here that makes it easy to separate old power cords from the torn network that needs repair. If you cut this knot with scissors, the knot will fall apart. Do not use a thick thread for the safety loop, since the net fabric can get caught in the knot during fishing.​ ​Task:​
• ​When planting a network from a ready-made network fabric, you can give different shapes to the cells of the network fabric. A cell is called symmetrical (C) if its width is equal to the distance between nodes. A cell is called wide (W) if its width is greater than the distance between nodes. If the width of the cell is less than the distance between the nodes, the cell is called narrow (N).​
• ​Usually such a net is waded; you can do it alone. Put on high rubber boots, secure one end of the net to the shore and lay the net further along the shore, with the floats up and the weight down. Gradually straighten it out, making sure it doesn't get tangled. It is best to check the net every three to four hours so that the fish does not have time to fall asleep.​
• ​On hand-tied nets, use a running planting. Its main advantage is the absence of fastening nodes, which allows the net fabric to move along the landing thread. This landing makes ​It would seem easier, I threw it​If the net is a large enough structure and it takes a long time to weave it, then you can make a landing net from fishing line. You need to knit a seamless “stocking” and then put it on a ring with a handle. Such a homemade landing net is invisible in the water, the fish are not afraid of it, which is very useful for fishing.​
• ​Repeat the procedure until the entire network is strung.​

KakProsto.ru

​20 mm – for small fish and live bait.​

You will need

1. ​A fishing line net is preferable, it dries faster, does not rot, and has a longer service life.​
2. ​Triple pig's hoof knot​
3. ​The right-handed “pork’s hoof” loop provides greater freedom to the network fabric, since the tension of the cord does not narrow, but, on the contrary, opens the cells.​
4. ​The length of the deployed network fabric is 60 m, and the distance between nodes is 50 mm. The required length of the top landing of the network is 27 m. What should be the width of the mesh on the cord?

Instructions

• ​cell narrowed by 10%, symmetrical cell and cell widened by 10%​
• ​If the shore is too shallow, then the net must be set out from the boat. In such cases, long nets with large mesh are used to prevent small fish from getting caught in them. It is most convenient for two people to set up the net from a boat. One of the fishermen will row, and the second will gradually set up the net. It is inconvenient to do this alone, especially if there is a current in the river. You need to find a catchable place, for example, a reed cape that will protrude into the shore. Sail away from the shore, determine the direction of the wind and place the net perpendicular to the shore. Thus, fish swimming along the cape will definitely fall into your nets.​
• ​network​
• ​network​
• ​Landing net

KakProsto.ru

​Landing involves equipping it with weights and floats. Nowadays, weight cords or chains are used instead of weights. When landing on the line, sinkers are not used.​

​40-50 mm – for crucian carp and bream.​

​Look at the video on how to weave such knots:​

​The knot can be damaged by improper tightening. The thread should be tightened in the direction in which it naturally twists (according to the direction of the thread). The knot cannot be separated. Bring the threads close to each other, but do not cross them, otherwise they will immediately get tangled.​

​If there is a need to make the network particularly reliable, then the landing thread can be tied to the network fabric using various options for the clew knot, which requires more time.​

​1) The length of the unfolded network fabric (mm) is divided by the length of one stretched cell (mm) (60 x 1000): (2 x 50) = 600 (there are 600 cells along the length of the fabric with a distance between nodes of 50 mm)2) Landing length or the corresponding cord (27 m) is divided by the number of cells available in the finished network fabric (27 x 1,000): 600 = 45 mm.​

​The top landing of this 50 mm net (picture on the left) is made of cells narrowed by 10%.​

​Networking means tying the network fabric to a cord. Tying is done manually, using a shuttle, or using machines. The lower load cord of a regular net is 6 m longer than the top (with a stretched net length of 60 m). The lengths of the upper and lower cords are 27 m and 33 m, respectively. This difference in cord lengths gives the net the sag necessary for good catchability. A net planted in this way can tightly cover the catch. In the manufacture of other net fishing gear, such as, for example, a top, such sagging is sought to be avoided, since it is undesirable for the fish to stick to the net fabric. When planting the net, you should take into account the elongation in advance in case the net is subjected to significant tensile load, for example, when fishing at sea.​

​Drift landing got its name from nets with the same name. Here you need to secure the landing thread to the selection with a simple landing knot. Wrap the thread coming from the knot at a distance of 3-4 strokes around the root end and then tie both threads into a knot at a fixed length of sag. The landing thread seems to be twisted in half. For greater rigidity of the entire structure, you can use a mesh.​

​Momoi Fishing specializes not only in netting, but also makes other fishing tools. For example, this company has developed a very convenient landing net. Thanks to hand-knitting, this landing net is very durable and allows you to catch large fish.​

​Weight cord​

​120-140 mm – for large pike.​

Planting a fishing net (part 3)

Threading the shuttle

​One of the most popular fishing lines is UniLine (Chameleon), production is controlled by Momoi Fishing - Japan. The coating is unique, which reduces visibility, so this net made of fishing line allows you to increase catchability by 20%.​

​Here are particularly strong knots (according to Ahvenanmaa, 1988)​

​With the planting method shown in the figure, the result is an elongation and “bubbling” of the net in the horizontal direction with the formation of folds in the bottom cord. This method is used for machine planting. The auxiliary cord is tied to the main cord, and the auxiliary cord is longer and thinner.​

The initial stage of planting a fishing net

​Answer: When planted on the top cord, the width of the cell is 45 mm.​

​Average cell width for top landing: 50 - (10 x 50: 100) = 45​

Planting a fishing net (part 4)

Methods for making connections and knots for landing a fishing net

​This shows the difference in length between the top and bottom cords of the network from above (“bird’s eye view”). The effect of cord length differences increasing sag is greatest for large vertical networks.​

​Fishing is one of the entertaining hobbies; it is also called silent hunting. Because landing a caught fish is a very exciting spectacle; it requires effort and skill from the fisherman. However, the same cannot be said about fishing with nets. The catch in this case depends on the correct setting of the net.​

It has a lot of features that simply cannot be ignored. Much depends on the correct fit of the network.​

​If we’re talking about making wickerwork yourself, then in the video you can see how a fish tank is made from fishing line:​

​Chinese nets are popularly called "Chinese" and are in demand among Russian fishermen. Chinese chains are actually made in China, while Finnish chains are not necessarily made in Finland. Their main advantage is their low price. The inexpensive price allows you to simply throw away this net if it gets too tangled. Chinese nets are also made to be very long, so you can cover most of the reservoir. But these networks do not differ in quality. It happens that the mesh itself spreads or does not sink, since the Chinese saved on the sinker and floats. Many people buy Chinese three-wall nets, but after examination, it turns out that they do not have a fit as such; in practice, they are planted 1:1. There are also complaints about the quality of knitting knots; sometimes they come untied. But usually, when buying Chinese nets, experienced fishermen remake them, correct them and they become quite suitable for fishing.​

​First, part of the network is weaved, it is called del, and then the net itself is assembled from the del, which is secured to a stronger rope or braided cord. They say “make a landing”, or put him on selection. The landing is 1:2; 1:3, even 1:15.​

​Mesh made from fishing line is a universal material and is used in various industries.​

​Although most fishermen consider a net to be non-sporting gear, there are many situations when you simply cannot do without it. Therefore, many people want to know how to weave a fishing net from fishing line at home. I will name several cases when fishermen have to use a net. First of all, this is permitted fishing at sea. It uses a mesh made of twisted fishing line. Fish are also commercially harvested in many rivers. Well, in some remote villages, where fish is one of the main foodstuffs, they certainly don’t fish with spinning rods. In such places, fishing with nets is popular even in winter.​

​The Danish method of top-planting a net (1985) for near-surface fishing for taimen and salmon: the lower of the two upper floating cords is threaded into the meshes of the net. The cords are sewn together by machine at certain intervals.​

​To thread the thread into the shuttle, the spool is installed in such a way that it can freely rotate around its axis, for example, on the floor between the legs. The shuttle is taken in the left hand (left-handed people take it in the right), squeezing the tip from above between the thumb and forefinger. The end of the thread is first attached to the slot of the shuttle, for example using a pig's hoof knot. From here the thread is pulled down and through the hole to the other side of the shuttle while turning the shuttle. The thread passes around the rod with the slot downwards, etc. The direction of the thread is adjusted using the thumb and index finger of the right hand. The shuttle must be rotated; this procedure is performed using the left hand. The movement should be reciprocal and not rotational. This will prevent the thread from twisting.​

​The pitch of the net on the floating cord is 45 mm and the mesh width is also 45 mm. Knots cannot be made on top of the floats.​

​The net can also be planted in such a way that the upper floating cord is longer than the lower one. In this case, the upper part of the net becomes loosely stretched and more catchable than the lower part of the net. This method of setting a net is usually used in the Northern part of the Gulf of Bothnia (data as of 1985) for bottom and near-surface fishing for whitefish. Working with a net set this way requires practice, and their use, especially floating nets of significant vertical dimensions, can be difficult for a beginner.​

​- networks;​

​Setting the net means tying the net fabric to the cord. It can be done manually using a shuttle, and when knitting a network by machine, it can be done automatically. The bottom cord is called the weight cord and it must be larger than the top cord. So, for example, with a network length of 60 meters, the length of the lower cord will be 33 meters, and the upper cord will be 27 meters. There is an option when, on the contrary, the upper cord is longer than the lower one. In this case, the upper part has a weak tension, which makes

​Folk sign: If you dreamed of a fishing net, then expect small joys, but only when it is whole; if it is torn, then there will be disappointments in life.​

​They mainly buy Chinese nets made of thick fishing line, with a diameter of 0.27-0.35 mm. Typically, thick white fishing line is used to make them.​

​Weaving a net fabric yourself is not at all necessary; you can buy it in a store and then attach it. This is what many people do, by the way. The best Russian and Finnish Delhi.​

mtex.net.ua

​A net made of fishing line is also called a doll.​

​Therefore, an article about networks and how they can be connected will be useful to many.​

​In the lower landing, three or four cells are tied with a loop to the weight cord. Using two bottom landing cords reduces twisting and tangling of the net. The matter is further simplified by the fact that one cord is twisted to the right (Z), and the other to the left (S).​

Required tools and materials

​Shuttles come in various models and sizes. Since ancient times they have been planed from wood and sometimes made curved. Juniper is considered a good material for a shuttle. Nowadays, plastic shuttles made at the factory are used.​

​This top fit is made in a 2/1 ratio (2 cells on the same loop). The distance between the nodes of the planted network when using this method is twice as large as the width of the cell (the cells are narrow).​

​The following advantages can compensate for the disadvantages encountered when working with the above type of network:​

​- boat;​ ​network​

​Can we just fuck her!? ! Stop poaching!!!​

​As always, the Japanese are ahead of the rest with their unique technologies. Their nets made from twisted fishing line have all the qualities necessary for fishing. Twisted fishing line is a multi-monofilament thread. This thread includes from 3 to 12 individual fibers. When purchasing twisted mesh fabrics, you can determine by the inscription on the package how many threads are in it and what diameter, for example, 0.17 x 3 mm shows that 3 threads of 0.17 mm each are twisted into a single bundle. Features of mesh made from twisted fishing line:​

​To plant a net, you must first mark the cord and determine how many cells need to be attached to the marking. For example, for networks with a 30 mm mesh, the length of such gaps will be 16 centimeters. That is, every 16 cm you will have to fasten every third cell. This fit will be 1:3. The sequence is:​

​The form of networks can be different:​

​Fishing net​

Shape and size

​In this folded network (Hailuoto, 1985), four cells are attached to a loop and one cell is left free. This net is used for bottom fishing for whitefish.​

​The photo shows the so-called “Norwegian” shuttle.​

​A support cord is attached next to the main (supporting) cord to compensate for the sagging of the network. The double power cord requires secure fastening. It works better than a single cord network.​

​the lower weight cord when bottom fishing rarely gets caught, for example, on stones​

- high boots;

• ​more catchable. This method of planting is common in the northern waters of the Gulf of Bothnia.​
• ​Do you have a license to fish with nets? Or should your question be considered a violation of the agreement with mail ru users???​
• ​Softer and more elastic.​
• ​Secure the line to the shuttle.​

Landing

​Single-walled - in them the fish clings with its fins, a simpler shape. Such nets are placed on the upper and lower selections, and secured on the sides with strings. The length of the strands is 20% less than the height of the network.​

​It is impossible to link a network unless you have special tools.​

​When planting a network, a large number of knots are knitted and, in addition, the same knot can be performed in several different ways. The strength of a knot is not always affected by its design (shape). The method of execution, the correct tightening and materials are of great importance. The knot options shown here are not suitable for left-handed people. A left-handed person usually performs these knots “in a mirror image” and moves to the left when performing the knot.​

• ​The initial cells (5 - 10) can be tied directly to a previously prepared cord, and after that the “linear” planting can be continued. It makes sense to tie the first two cells to one point. This solution will allow you to set the angles of the network and increase its strength.​
• ​The lower landing of the network is carried out with the cells widening by 10%.​
• ​The loosely stretched upper section of the net is free and wraps large fish well, as if in a “swaddle”​
• - waterproof suit.
• ​One of the popular methods of planting a network is using a pole. A milestone is a special ruler used as an aid. Make notches at its ends corresponding to the distance between the nodes. To make the pole universal, suitable for networks with different cells, stick several tapes with different meanings on it. But, as a rule, experienced net knitters do not need it.​

​make sure normal fishermen don’t bait you!!!​

​I am resistant to salt water and ultraviolet radiation.​

​Tie the end of the thread from the shuttle and the outermost mesh of the net fabric to the picking cord.​

Chinese networks

​Two- or three-walled - fish get entangled in them; their complex shape is also called entanglements.​

​The fishing line mesh has different meshes. The cell size depends on the size of the fish. In order to maintain the appropriate size, you will need a strip whose width will be equal to the width of the cell. A regular school ruler can serve as a bar; if you need a smaller mesh, look for a narrow ruler.​

Twisted mesh

​Network node from Selgskar (1980) Network node from Larsmo (1990)​

• ​If a previously made vertical (end) cord is not used to plant the width of the network, then you can tie the outermost 3 to 10 cells of the network fabric together. After this, all cells located vertically along one line are connected from top to bottom into one bundle (cord), forming a vertical fit. It makes sense to make knots in the corners before planting is completed. If the landing starts from the top corner, then it is recommended to use the following types of knots.​
• ​Average cell width for bottom landing: 50 + (10 x 50: 100) = 55 mm​
• ​when fishing with a floating net, there is no twisting even in strong waves, and debris floating by passes over the net without getting stuck in it
• ​Before you set up a net, you need to choose a place for fishing, find out what kind of fish is found in a given body of water, because the type of net and the location of its installation depend on this.

Landing net

​The simplest installation for large mesh nets is to thread the cord through the mesh. A mandatory element of landing is a knot. From the variety of knots, choose a double knot; it is very popular among fishermen and is especially often used when landing a seine.​

It might be useful to read:

• How to get on an excursion to Antarctica?;
• Czech Republic Troy Castle. Troja Castle in Prague. Ancient winery and museum;
• Böcklin and his “island of the dead” A cultural phenomenon of its time;
• Air tickets to Crimea Air tickets to Crimea will become cheaper;
• What you can and cannot take with you;
• Open left menu Heviz How to get from Budapest to Lake Heviz;
• Cable car in Nha Trang (Vinpearl) The longest cable car in the world Vietnam;
• Kamenets-Podolsk fortress - a historical monument of Ukraine Life outside the walls of the Kamenets-Podolsk fortress;