Winter tent stack prism two-layer. Winter tent stack prism two-layer product reviews Winter tent stack prism

A special subspecies is presented here: for. These are used for winter on ice.

A homemade one can be made from old aluminum ski poles in this way:

The sticks must be cut into pieces 50 centimeters in size for compact installation. The diameter of the sticks is 16 mm. To connect these parts, 4 tubes with a diameter of 13 mm and 2 rods with a diameter of 10 mm, cut from children's ski poles, were used. The structure is connected using hinges, rivets, and hooks. Everything must correspond to the diameter of the tubes.

Frame assembly

The place where the hinges need to be attached is determined on the tubes and holes are drilled. It is important to get the right angle for attaching the posts to each other; this is the main rule for installing hinged mounts. Locking strips are made on the side posts at an angle of slightly more than 90 degrees.

To secure the telescopic connections of the tubes to each other, holes with a chamfer for the ball are drilled at the points of their connection. The size of the holes is 5.5 mm, and the size of the ball is 6 m. In a children's ski pole, recesses are made for this ball. The ball is attracted by a piece of rubber hose.


1- adjustment of hinges; 2 - telescopic connector; 3 - fastening racks

First, the rear strut is mounted. The side tubes are mounted at a 90-degree angle on a three-way hinge. Then the side posts are also assembled, followed by the support tubes at the bottom. The front pillar is mounted in a similar way. Ten pieces of stoppers are assembled during the frame assembly process.

The next stage is making the awning. You need to take light, waterproof material, maybe bologna fabric or. You should sew it yourself according to the pattern. There will be hinges at the attachment points with the frame. First, part of the bottom is sewn on. Then cuts are made on the sides and a zipper is sewn on - this will be the entrance to the tent. The racks will be inserted into the corners; there you will need to sew fabric pockets under the racks. Be sure to sew on the bottom of the tent to prevent snow from blowing in.


Construction and stretched awning

Thanks to the hinges, this one will fold compactly. And you can put it like this:

Unfold, stand inside and begin to unfold the hinges. Pull out the telescopic tubes and secure the stands.

Popular wisdom: You shouldn’t take new gear for serious fishing; it’s better to use proven ones.

Types of winter fishing tents

Tent poles are made of metal or plastic. If you have difficulty choosing, then you need to weigh all the advantages and disadvantages of these materials. The fact is that metal is reliable, but expensive. Plastic, although a cheap, more accessible material, however, has its drawback - there is a possibility that it will break at any time, especially at low temperatures.
Taking into account the design features, tents for winter fishing are divided into two types:

  1. The automatic tent is popular with winter anglers who prefer active fishing methods. The advantage of this type of tent is its mobility. They are assembled in a few minutes and disassembled just as quickly. However, there is also a drawback - large windage, instability to the wind. A tent's poor resistance to weather conditions cannot provide comfortable fishing. In practice, it is impossible to somehow reduce this indicator: no matter what is done, not a single type of stretching helps.
  2. Frame tents are the opposite of the automatic type; their installation time is several times longer. But these models are endowed with greater stability and have excellent capacity. Those who like to use spinners or balancers constantly move around the pond, so it is more advisable for them to choose an automatic tent. For white fish hunters who require perseverance and spending a long time in one place, the best option would be a frame type.

Umbrella tents. This type belongs to the category of automatic tents. It features an umbrella opening method. Successfully combines mobility, simplicity and active wind resistance. The design is a tent with 4 or 6 beams that act as umbrella spokes. The material can be safely described as durable and strong, endowed with increased moisture resistance. Models from well-known manufacturers often use high-quality synthetic fabric. For ventilation, there are appropriate valves located at the top, and it is also possible to regulate the level of ventilation.

Using available means, you can install heating without much effort. So, many fishermen prefer to use dry fuel tablets of various types. You don’t have to worry about cold air getting in from below, since the bottom is made of a fairly long, unique material.
The weight of the tent is no more than 3 kg, assembly is quite easy and quick. When assembled, it easily fits into a container, which is very convenient for transportation. The fishing market offers a fairly wide range of umbrella tents designed for different fishing methods. There are small models on sale that are installed in the shortest possible time and allow you to quickly move to another location. However, spacious, roomy tents with an increased level of comfort are also offered.

Nuances of choice

The choice is made difficult by the wide variety of models, both domestic and imported. Russian manufacturers show themselves quite worthy. Chinese analogues, notable for their low cost, have a number of disadvantages: the quality of the material is not very good, poor stability, etc.
The most popular are tents from imported manufacturers, in particular products from Maverick Ice. Of course, the price of the product is high, but it's worth it. Durability, increased level of comfort, good resistance to weather conditions and high performance qualities will more than pay for the costs.

Based on color, fishing tents are divided into day and night tents: for different times of the day you need to use a suitable color.
According to their design, fishing tents are divided into umbrella and arc tents. Umbrella tents are very easy to unfold, but they take up more space when packed. Arc tents consist of a supporting system of arcs fastened together. This type of tent takes longer to assemble, but at the same time it is compact and cheaper in comparison with its arc counterparts. Another tent shape for is a cube. This design has large capacity and increased comfort.

Show all text

Winter tents Nelma Winter tents Nelma. Looking for a gift for a fisherman? This is a tent for winter fishing Nelma with a seal! Order a winter tent for your friend, boss or colleague that no one else has! PT2M55S

Tent for winter fishing "Nelma 2" from the company "Mitek" Winter tent Nelma 2. A tent is useful for any stationary winter fishing. This is especially true for those who fish from the ice at night. It will protect from cold, wind, and precipitation. Like yoghurts, not all tents are created equal. Many years ago, I carefully chose a tent for winter fishing and chose the Nelma-2 tent manufactured by Mitek. Subscribe to the salapinru channel - http://goo.gl/0RYxP5 Playlist Tackle and accessories - http://goo.gl/YS1FHz Playlist Educational fishing video - http://goo.gl/buXaUe Playlist Groundbait and bait - http:/ /goo.gl/smHQ8C Since then I have never regretted my choice, and this year I am switching to the latest 2012 model. The manufacturer closely monitors feedback from fishermen and constantly improves its product in accordance with their requirements. Compared to my old tent from five years ago, I counted 10 differences that improve comfort and safety while fishing! In this video I will clearly explain and show why I chose this particular tent for my fishing trips. More details: http://salapin.ru/blogs/video4467.html PT16M10S

Three-person fisherman's tent Nelma 3 Lux (automatic) is an excellent, modern tent that is suitable for lovers of winter fishing. Unlike previous versions of these tents, it has impressive dimensions and relatively light weight. Thanks to its high height (190 cm), you can not only sit in it, but also stand. You will be visible even in bad weather and at dusk thanks to the bright orange dome. And since the walls of the tent are made in light colors, you will feel very comfortable on a cloudy day. This tent is designed on a quick-disassembling umbrella-type frame made of high-quality material (aluminum rod of grade V-95T1), which provides the necessary stability and ease of use, and the time required for its assembly and disassembly is extremely short. The design – hexagonal frame – is durable and wind-resistant. In addition, for maximum protection from the wind, the tent is equipped with a windproof skirt. There are ventilation valves to ventilate the tent. In the manufacture of the tent of this product, a combination of companion fabrics was used that have water-repellent properties, the necessary hygroscopicity and light transmission (Oxford 300D PU 2000 mm), which provides comfortable conditions for winter fishing, excluding the appearance of condensation inside the tent. The use of a closed skirt on the outside of the product (width 20 cm) ensures a tight connection to the surface and protects it from the influence of external factors. The ventilation valve located opposite the entrance provides additional air flow. Frame - duralumin B95T1 9 mm Height - 190 Number of seats - 3 Water resistance - 2000 mm Material - Oxford 300D with polyurethane impregnation PU 2000 Type - umbrella All sizes - Height 190 cm. Diagonal 280 cm, between walls 240 cm Features - windproof skirt external and internal, many pockets at different levels, wide window with zipper, top and bottom flaps Warranty - 1 year

Weight: 5 g. Water resistance: 2000 mm. All sizes: 220*270*160 cm. Height: 160 cm. Frame: duralumin. Material: Oxford 240D Features: hexagonal frame. Area: 4.71 m2. packaging weight kg: 5.2 packaging dimensions cm: 120*18*18 Many fishermen are looking for solitude and peace during winter fishing. And they are not happy about unexpected guests who try to pester you with questions: “How is it biting?”, “Did you catch a lot?”, or simply ask for a smoke, to borrow bloodworms, to warm up and chat... The photo on the door clearly, but with humor, gives understand to such guests that they are not welcome here. That in the tent there is a person with a fine mental organization, prone to introspection and relaxation in solitude. Nelma's tent "There are no fish here!" produced in limited quantities. Unique design, bright colors, combined with the excellent quality of Nelma tents, make this model an excellent gift for an ice fisherman! Looking for a gift for a fisherman? This is a tent for winter fishing Nelma “There are no fish here!” The three-person tent "Nelma" - automatic is perfect for lovers of winter fishing. The light gray walls of the tent perfectly reflect daylight, so even in cloudy weather it will be quite light inside. The hexagonal design of the tent provides it with special strength, and to prevent the wind from penetrating inside, it is equipped with a windproof skirt. A convenient folding mechanism will allow you to set up and assemble the tent in a matter of minutes. To prevent condensation from collecting on the walls, it has two ventilation windows - one at the bottom, the other on the dome. For your convenience, the tent has essential features such as internal pockets and a loop for hanging a flashlight. The presented product has an ergonomic design and is designed on a quick-dismounting umbrella-type frame made of high-quality material (aluminium rod of the B-95T1 brand), which ensures the necessary stability and ease of use. In the manufacture of the tent of this product, a combination of companion fabrics was used that have water-repellent properties, the necessary hygroscopicity and light transmittance (Oxford 240D PU mm.), which provides comfortable conditions for winter fishing, excluding the appearance of condensation inside the tent. The use of a closed skirt on the outside of the product (width 20 cm) ensures a tight connection to the surface and protects against the influence of external factors. The ventilation valve located opposite the entrance provides additional air flow. Terminology: Weight (from 0.0 to 68.0 kg) The lightest tents weigh from 0.8 to 2 kg. These are mainly trekking and extreme tents, designed for one or two travelers. The heaviest are camping tents, since such models are often designed for a group of 4-6 people or more. The weight of some models reaches 60 - 70 kg. Such tents can accommodate up to 20 people (for more details, see "Number of places"). Internal pockets The presence of internal pockets will allow you to organize the space inside the tent.

The three-person tent "Nelma" - automatic is perfect for lovers of winter fishing. In 2012, the Mitek company introduced a new version of this tent. Unlike the previous version, this tent is equipped with a bright orange dome, which will be visible even in poor visibility conditions. The light gray walls of the tent perfectly reflect daylight, so even in cloudy weather it will be quite light inside. The hexagonal design of the tent provides it with special strength, and to prevent the wind from penetrating inside, it is equipped with a windproof skirt. A convenient folding mechanism will allow you to set up and assemble the tent in a matter of minutes. To prevent condensation from collecting on the walls, it has two ventilation windows - one at the bottom, the other on the dome. For your convenience, the tent has essential features such as internal pockets and a loop for hanging a flashlight. Terminology: Internal pockets The presence of internal pockets will allow you to organize the space inside the tent.

The presented product has an ergonomic design and is designed on a quick-dismounting umbrella-type frame made of high-quality material (aluminium rod of the B-95T1 brand), which ensures the necessary stability and ease of use. In the manufacture of the tent of this product, a combination of companion fabrics was used that have water-repellent properties, the necessary hygroscopicity and light transmittance (Oxford 240D PU mm), which provides comfortable conditions for winter fishing, excluding the appearance of condensation inside the tent. The use of a closed skirt on the outside of the product (width 20 cm) ensures a tight connection to the surface and protects it from the influence of external factors. The ventilation valve located opposite the entrance provides additional air flow.

The ICE FISH 4 winter fishing tent with dimensions 180x180x210 cm is designed for 4 people. The cube shape makes it possible to use the maximum usable space inside, and the design features ensure quick assembly. A bright blue or orange tent with contrasting elements will be noticeable both in snowfall and at dusk. MATERIALS AND TECHNOLOGIES Dense waterproof awning fabric Oxford 420 D impregnated with PU 5000 mm.h. excellent protection from bad weather: during snowfall, gusts of wind or prolonged rain. High-strength Fiberglass frame with a diameter of the main arcs of 9.5 mm is resistant to strong wind loads and will withstand frequent use at sub-zero temperatures. Reflective elements on each side will be visible in the headlights. and will increase safety in the dark EASY TO OPERATE A 30 cm continuous windproof skirt enhances the thermal insulation in the ICE FISH 4 winter tent, protecting it from blowing from below A pair of removable transparent windows made of TPR thermoplastic rubber allows light to pass through well even on a cloudy day and allows you to observe what is happening outside , while remaining in a fishing tent Two special openings with a wind valve and a mesh will support natural ventilation and prevent snow from entering H1-Winter fishing tent ICE FISH 4 180x180x210 cm Certificate No.-419-00017 Weight in the minimum configuration, kg-8 Windproof skirt-Yes Type of certificate - Letter of refusal Water resistance of the awning, mm in. Art.-5000 Overall dimensions of the outer tent (awning), LxWxH, cm-180x180x210 Ironing-Do not iron Diameter of the arches of the main frame, mm-9.5 Number of entrances-1 Number of pegs, pcs.-8 Number of rooms-1 Number of seats-4 Equipment-Tent , screws -8 pcs Tent design - Single layer with skirt Brief description - Size: 180 X 180 X 210 cm Material: Oxford 420D PU 5000 mm Transparent polyurethane coating. Frame arc material-Fiberglass Awning material-Oxford Directions-Fishing Bleaching-Do not bleach Gender-Unisex Awning impregnation-PU Seasonality-Winter Wash-Only hand up to 40 Country-China Drying-Horizontal drying Frame type-Internal Brand-WOODLAND Insulation-No Dry cleaning - Dry cleaning prohibited Packaging volume. unit, cubic m.-0.043416 Color-Orange Main base color-Orange

Winter Tent Stack are very popular among fans of real fishing. Awnings from a trusted manufacturer are distinguished by excellent workmanship and a design thought out to the smallest detail.

Features of branded models

The manufacturer pays great attention to manufacturing quality. Durable, reliable materials are used for production. Frames are made of lightweight aluminum or fiberglass. Such systems have excellent resistance to mechanical stress. Due to their high shock-absorbing properties, they maintain the geometry of the structure even in strong wind conditions.

Tent Stack have water-repellent and heat-saving properties. The outer layer of the structures is made of synthetic oxford fabric of different densities. The fabric protects well from precipitation and gusts of wind.

All models of the manufacturer have a number of common advantages:

    Quick installation. Thanks to the functionality of the frame system, assembly takes just a few minutes. It will be even faster to disassemble the structure.

    Excellent stability. Having decided buy a winter tent Stack, you will receive a reliable protective awning that is not afraid of even the strongest gusts of wind. This durability is achieved thanks to the outwardly curved walls and high streamlining of the surfaces.

    Full ventilation. On the roof of each model there is a ventilation pocket with a zipper, thanks to which there will always be access to fresh air in the tent.

    Practicality. There are a sufficient number of pockets of different sizes on the inner surface of the walls. These pockets are suitable for storing personal items and various fishing accessories.

Design options

Price of winter tents Stack low, so accessible to everyone. The frame system can be in the shape of a cube or an umbrella.

Models with rounded walls offer excellent stability, making them ideal for fishing in open areas. Umbrella-type tents have strongly curved walls, which somewhat compensates for the degree of “eating” of space.

Buy cubic tent stack beneficial for a company of several people. Thanks to the same ceiling height throughout, each fisherman will have enough free space for all necessary manipulations. The ceiling dimensions of such models are usually slightly smaller than the floor area. In this case, the walls have an outwardly curved configuration. Due to these features, the streamlining and stability of structures significantly increases.

Types of awnings

We have Tent Stack in Moscow presented in one-, two- and three-layer options. The properties of the model will directly depend on the type of awning.

Single- and double-layer structures are made of synthetic Oxford fabric, which has water-repellent properties and retains heat well. Most often, such models are small in size, so they do not require additional insulation.

Three-layer awnings are supplemented with an insulating layer of synthetic padding polyester and synthetic breathable fabric, which are connected to each other using a thermal method. Thanks to this feature, there are no seams in the insulating layer, which significantly increases its heat-saving properties.

Buy Stack tents in Moscow, means purchasing a functional and reliable companion for trips into nature. Our online store offers affordable prices for the entire range of products from the manufacturer. You can place an order online or by contacting us at the specified phone number.

Winter tent Stack Prism, probably the cheapest Prizma on the Russian winter tent market. The frame is made, like other tents from this manufacturer, from durable aluminum alloy B95T1; this alloy makes the frame highly durable and springy enough so that the tent does not break under the weight of snow, wind and other loads. The awning fabric used is stronger and more waterproof than that of standard models of winter tents from the Stack Classic series. The dimensions of the tent when assembled will please many connoisseurs of compactness, only 40x140 cm, but when unfolded, the dimensions will please even very large fishermen: the side of the tent is 150 cm, along the lower diagonal is 220 cm, with a weight of only 5 kg these are very impressive dimensions. On the walls of the tent, in places structurally designed for disassembly, there are reinforced loops, which are also used for guy ropes.

Winter tent Stack Prism is equipped with a wind-snow protective skirt around the perimeter of the tent, which is wide enough to be able to cover it well with snow, its width is 25 cm. Like every winter tent, it is equipped with a ventilation hole, in this case a window with a zipper. There is only one pocket for small items, the door has a two-lock zipper with a wide and comfortable pulley.
Cheap winter tent Stack Prism Made from Oxford 300PU material.

Characteristics

Weight 7 kg
Manufacturer, country Russia
frame Cube
Basics
Brands Stack
Dimensions
Height 170 cm
External dimensions 150 × 150 × 170 cm
Material
Material Oxford 200PU
Frame fiberglass 8.5 mm
Additionally
Form cube
type Single layer
Type winter fishing tent
Tent type Winter

0 reviews for the product Winter tent Stack Prism

Delivery

Dear buyer!
Our online store Tocamp's delivery service operates seven days a week. And we are glad that you chose our store. We will deliver the goods within 1-3 business days from the moment the order is placed. Our managers will be happy to provide you with more detailed information about delivery time.

The minimum order amount is 500 rubles.

Delivery in Moscow

The cost of delivery in Moscow within the Moscow Ring Road is 350 rubles.

When ordering an amount over 10,000 rubles and weighing less than 10 kilograms, delivery will be free, within the Moscow Ring Road

If the order value is less than 1000 rubles, the delivery cost is 500 rubles.

Delivery across Russia

If you need to deliver goods to other cities in Russia, then there are several options.

1. You place an order, We confirm the availability of the product you have chosen, you make an advance payment from 20% to 100% of the order value, using a Sberbank BLITZ transfer, transfer to our Sberbank card or other agreed method and we send the product you have chosen after receiving the funds Russian Post or EMS Russian Post. Upon receipt of your order, you will only have to pay the cost of postage, which you can calculate on the Russian Post website.
Our company guarantees that after receiving money for postage and the ordered product, we will send it to you within 1-3 days.
Our company guarantees that all ordered goods will be properly packaged to ensure their integrity and safety. If we are unable to send you the ordered product, we undertake to send you the money back as soon as possible.

Oversized parcels are sent only after prepayment!

You can track your parcel on the Russian Post website.

2. Delivery of goods by the transport company is subject to 100% prepayment.

Delivery to the Russian Post and to the transport company costs 200 rubles.

Delivery to the Moscow region

Delivery costs are calculated according to the scheme 350 rub.+30 rub. per kilometer.

Remember that the time spent coming to us can be much more expensive than the cost of delivery.

Pickup available.For pickup you must be sure to place an order through the website, where you indicate the required product, after which our manager will contact you and specify the pickup time. The pick-up point is located at: Moscow, Pyatnitskoe highway 24 from 1

Probably the cheapest two-layer Prizma on the Russian winter tent market. The frame is made, like other tents from this manufacturer, from durable aluminum alloy B95T1; this alloy makes the frame highly durable and springy enough so that the tent does not break under the weight of snow, wind and other loads. The awning fabric used is stronger and more waterproof than standard models of winter tents from the Stack Classic series. The inner fabric of the tent is Gretta, composition 80% synthetic, 20% cotton, this makes the tent warmer, the second layer does not allow condensation to accumulate on the inner walls, and Accordingly, cold drops will not drip onto your head. The dimensions of the tent when assembled will please many connoisseurs of compactness, only 40x140 cm, but when unfolded, the dimensions will please even very large fishermen: the side of the tent is 150 cm, along the lower diagonal is 220 cm, with a weight of only 7.5 kg these are very impressive dimensions. On the walls of the tent, in places structurally designed for disassembly, there are reinforced loops, which are also used for guy ropes. Winter tent Stack Prism two-layer is equipped with a wind-snow protective skirt around the perimeter of the tent, which is wide enough to be well covered with snow; its width is 25 cm. Like every winter tent, it is equipped with a ventilation hole, in this case a window with a zipper. There is only one pocket for small items, the zipper on the door has two locks with a wide and comfortable dog.
Cheap personal tent Stack Prism two-layer Made from Oxford 300PU material.

Each winter fishing tent comes with a GIFT! Telescopic hook, scoop or screws! Ask the operator!

Characteristics

Weight 7.2 kg
Manufacturer, country Russia
frame Cube
Basics
Brands Stack
Number of seats 1
Dimensions
Height 170 cm
External dimensions 150 × 150 × 170 cm
Material
Material Oxford 200PU
Frame fiberglass 8.5 mm
Inner fabric Gretta 80% synthetic 20% cotton
Additionally
Form cube
type Double layer
Type winter fishing tent
Tent type Winter

0 reviews for the product Winter tent Stack Prism two-layer

Delivery

Dear buyer!
Our online store Tocamp's delivery service operates seven days a week. And we are glad that you chose our store. We will deliver the goods within 1-3 business days from the moment the order is placed. Our managers will be happy to provide you with more detailed information about delivery time.

The minimum order amount is 500 rubles.

Delivery in Moscow

The cost of delivery in Moscow within the Moscow Ring Road is 350 rubles.

When ordering an amount over 10,000 rubles and weighing less than 10 kilograms, delivery will be free, within the Moscow Ring Road

If the order value is less than 1000 rubles, the delivery cost is 500 rubles.

Delivery across Russia

If you need to deliver goods to other cities in Russia, then there are several options.

1. You place an order, We confirm the availability of the product you have chosen, you make an advance payment from 20% to 100% of the order value, using a Sberbank BLITZ transfer, transfer to our Sberbank card or other agreed method and we send the product you have chosen after receiving the funds Russian Post or EMS Russian Post. Upon receipt of your order, you will only have to pay the cost of postage, which you can calculate on the Russian Post website.
Our company guarantees that after receiving money for postage and the ordered product, we will send it to you within 1-3 days.
Our company guarantees that all ordered goods will be properly packaged to ensure their integrity and safety. If we are unable to send you the ordered product, we undertake to send you the money back as soon as possible.

Oversized parcels are sent only after prepayment!

You can track your parcel on the Russian Post website.

2. Delivery of goods by the transport company is subject to 100% prepayment.

Delivery to the Russian Post and to the transport company costs 200 rubles.

Delivery to the Moscow region

Delivery costs are calculated according to the scheme 350 rub.+30 rub. per kilometer.

Remember that the time spent coming to us can be much more expensive than the cost of delivery.

Pickup available.For pickup you must be sure to place an order through the website, where you indicate the required product, after which our manager will contact you and specify the pickup time. The pick-up point is located at: Moscow, Pyatnitskoe highway 24 from 1

The fisherman's tent Penguin Prism Siberia four-layer is the flagship of the Penguin tent model range; all the best developments and technologies used in production are concentrated in Siberia. For the first time in Russia, in winter tents for fishing, it was used 4-layer insulation system(3+1), in which the outer layer is our proprietary thermal stitch “scales” made of Oxford with a polyurethane coating and a high water-repellent effect, the latest Russian high-tech material “SIBERIA” is used as insulation, here is a quote from the manufacturer’s website: “Our classic insulation is This is a combination of three types of fibers selected in such a way as to improve the strength and elasticity of the material. We're tired of compromises, so Siberia Classic is a practical material that you don't have to worry about, because it takes care of you. Needless to say that it is warm and light? Costs." Siberia 2015

The inner awning is made of breathable material with water-repellent impregnation, installed on the inside of the frame, so an air gap of at least 30-50 mm serves as a very effective heat insulator.
All of the above leads to the fact that Penguin Siberia tents have an unprecedented level of heat retention and provide high comfort and safety for the fisherman.

Breathable inserts, which play a vital role in ensuring the microclimate inside the tent, are placed on the side edges. This decision completely closed the issue of waterproofness of the roof, which is now being manufactured without joints and seams made from a single piece of fabric, the total area of ​​the breathable inserts reaches 4,000 sq.cm. Four windows made of frost-resistant transparent film provide a panoramic view of the pond.

A convenient triangular entrance with safety valves and 4 sliders also allows you to regulate the exhaust or air supply. The developed design of the tent's reflective elements will make being on the pond at night safer, even with heavy traffic on ice on snowmobiles and ATVs.

Three technological valves with zippers in the corners of the tent, now it’s a question of supplying a gas hose, supply ventilation, etc. solved with one movement of the hand. The interior space of the tent is arranged as ergonomically as possible: four double side pockets with mesh pockets, an upper mesh pocket, an internal skirt, and an optimally selected size will allow the fisherman to fit in with the greatest comfort.

Tent Penguin Siberia can be operated at extremely low temperatures in a 4-layer version. In spring and autumn, at temperatures down to -18, it is enough to use a 3-layer option; for this, the inner awning is made easily removable, this is also useful when it is necessary to clean or wash the dirt on the inner awning. A transparent pocket for a fishing license can be used as a place for information about the owner of the tent, his nickname and affiliation with public associations.

The Siberia prism has a cube shape, which allows fishermen to rationally use space. You can now drill holes directly in the erected tent. The dimensions of PRISM allow you to do this without any inconvenience. Unlike the classic PENGUIN™ tents, the PRISMA tent is more wind-resistant. Thanks to its design, the tent can withstand gusty winds. Easily set up by one person in any weather. The outer awning has reflective elements, which is very important for safety on ice at night.
A convenient branded case allows you to freely stow away even frozen shelter after fishing!

Installation instructions:
1.Remove the “Prism Siberia” from the case.
2.In case of strong wind, first of all, it is necessary to secure one section to the stretcher.
3.One by one, open all sections of the shelter. You need to start from the roof. Each section opens without any extra effort (if this does not happen, it is necessary to straighten the rays of the section)
4.Attach the shelter to all existing guy ropes on the ice and sprinkle the tent thresholds with snow.

The zipper should close and open without effort. If this cannot be done, then you must:
- evenly distribute the tension of the bindings.

Assembly:
1. Before folding the shelter, it is necessary to untie the guy ropes and free the thresholds from snow and ice.
2. While on the outside, press down on the middle of each section in turn.
3.Fold the shelter, straighten it and, carefully folding it, put it in the cover.

ATTENTION! The tent opens and folds without any extra effort. In case of jamming, it is necessary to check and free the frame beams from entangled fabric or stretch marks.

Operating rules:
1. It is not recommended to smoke indoors.
2.Do not use open fire inside or in the immediate vicinity of the shelter.
3.After each fishing it is necessary to dry the shelter.
4. Be sure to secure the tent on the ice with as many guy ropes as possible.
5.When fastening the shelter on ice, distribute the guy wires symmetrically along the entire perimeter, which will help avoid distortion and excessive load on the zipper of the front door.
6.Do not sprinkle the thresholds with wet snow, otherwise the fabric will freeze into the ice.
7. Avoid mechanical damage to the shelter.
8. Wash the awning at a temperature not exceeding 30 degrees.

Store a clean, dry shelter, rolled up and packed in a cover.

Dimensions in packaging140 × 40 × 30 cm
Weight14 kg
ManufacturerPenguin
Peculiaritiesfour-layer, inner and outer windproof skirt, 4 double pockets, hanging mesh, 3 flaps at the bottom, 2 windows, 2 vents
Typecube
Material internalmixed fabric ST1 with water-oil-repellent impregnation, padding polyester 100 g/m2
External materialthermal stitch Siberia: Oxford 240D PU 2000, insulation Siberia Classic 100 g/m2, Oxford 240D PU 1000
Number of seats2
Frameduralumin V95T1 8 mm
Guarantee1 year
Height175 cm
Waterproof2000 mm
All sizesHeight 175 cm, along the wall 150 cm. Width 185 cm along the floor, 205 cm between hubs.

 

It might be useful to read: