How to make a winter fishing box with your own hands. Homemade fishing boxes Homemade box for ice fishing

It is impossible to imagine an ice fisherman without an ice fishing box. Beginners on their first try try to come up with something or borrow this main accessory after a fishing rod from more experienced comrades. Without a charabanc, ice fishing turns into a search for a way to get comfortable.

Features of selection and purpose

There are many areas of application for a fishing box. The main task is to store and transport all equipment to the fishing site: baits, baits, jigs, fishing rods and much more. It is also used as a catch storage point. Its design is such that it can serve as a comfortable seating area, eliminating the need to carry a stool with you. In search of a cool place, fishermen often go quite far, and every additional gram of luggage can always be unnecessary, so you need to take into account the weight of the box itself.

When choosing an option suitable for ice fishing, you also need to pay attention to the following properties:

When choosing or making a fishing box for winter fishing with your own hands, you need to take into account the way the owner prefers to fish. Its volume depends on this.

For those who prefer vertical lures, you don’t need a lot of gear: spoons, balancers, one or two fishing rods don’t take up much space. This is how they fish for perch or pike perch, covering a considerable distance when moving from one fishing point to another. This method of fishing involves getting up frequently to continue moving, so the box should be light, tall and small in size.

Having found a good place with frequent bites, jigs and floaters stay there for a long time. In addition to gear and other accessories, they have groundbait, different types of bait, a scoop for cleaning the hole and a tent that protects from the wind. Usually, a low rise with this method is more convenient, so the box should be voluminous and squat.

A capacious charabanc is needed by those who like to fish for predatory fish. The set consists of a dozen girders, a hook, a yawner, an extractor and various other equipment. Due to the length of the process, an extended supply of food and drink is necessary. Fans of combined fishing need a box of medium height and dimensions.

What the charabanc is made of affects all its characteristics. Low temperatures, humidity, increased load - it must withstand all these factors.

Metal boxes are the most popular. This is especially true for duralumin products. They can withstand low temperatures, are strong and durable, and have an attractive appearance. However, this is the most expensive and rather heavy accessory.

In recent years, plastic boxes have gained a lot of fans. They attract buyers with their light weight and variety of colors, but cannot boast of strength and frost resistance.

The disadvantage of wooden and plywood charabancs is the fear of moisture. They need to be dried after each trip to the ice.

The upper part of the seat must be covered with moisture-resistant soft materials. Manufacturers use foam rubber or polyurethane foam for this. The entire body must be covered with a thermal insulation coating.

Properly planning the interior space is no less important than choosing external characteristics. The presence of separate compartments for each type of accessories will allow you to quickly select the necessary gear. Fish stored in a separate compartment will not permeate sandwiches with its smell, and a thermos in a specially designated compartment will not be damaged by rolling around the box. A small window on the side will allow you to throw your catch inside without getting up.

An additional advantage will be convenient access for cleaning the fish compartment. The bottom surface of the lid should also not be empty. It can accommodate many compartments for all kinds of small items. If the gear is tightly packed and does not move chaotically when walking, then it will never get tangled.

Characteristics of boxes from different manufacturers

There are many companies producing equipment for winter fishing. They produce a lot of all kinds of accessories, including drawers. They have different characteristics and features.

Rapala Products

The Finnish company was founded in 1936 by fisherman Lauri Rapala, famous for inventing the bladed wobbler. Today, the products of this manufacturer are also released under other trademarks owned by the company: VMC (hooks), Sufix (lines), Marttiini (knives), Storm, Blue Fox, Williamson, Luhr Jense.

The enterprises of this organization also produce charabancs, which have the following advantages:

Salmo Company

This fishing tackle manufacturer entered the market in 1991. The company was founded by Polish ichthyologists and avid fishermen Piotr Piskorski and Radoslaw Zavorski.

Fishing containers from this manufacturer have the following characteristics:

The dimensions of most models are 33.5 x 23.5 x 39, where 39 is the height.
The products are frost-resistant and immune to mechanical damage.
Slightly heavier in weight than the Rapala.
Universal carrying method. They can be carried either in the hands or on the back, like a backpack, for which there are special loops.

Brand Aquatech plastics

The Ukrainian company produces a wide range of plastic products, including plastic boxes for winter fishing:

They are inexpensive.
Various internal components.
Most models are tall, but weigh no more than 3 kilograms.
Straps with anti-slip lining.
Withstands weight up to 130 kg.

Company Teho

The boxes of the Finnish manufacturer of equipment and accessories for fishermen are distinguished by the following features:

Along the edges of the bottom there are serrated anti-slip sides that prevent movement in windy weather.
Many models have foam in the lid.
There is a window for placing the catch inside.

Fishing accessories "A-Elite"

This brand belongs to the Apiko-Fish trading house. This brand produces regular charabancs and boxes in the Comfort category. They are distinguished by:

Has a built-in thermometer.
Pull-out tray and hanging glass included.
Adjustable strap.
Four compartments for small gear.
Comfortable seat.

Homemade devices

It's easy to make a fishing box with your own hands. A variety of materials are suitable for this. Some unnecessary supplies will also come in handy. Homemade boxes for winter fishing are made from the following elements:

plastic;
foam;
metal;
wooden or plywood.

Foam or plywood product

This lightweight product is completely heat-resistant, and you will feel comfortable sitting on it even in severe frost. It is made of material with a thickness of 3 centimeters. The manufacturing process is simple and consists of the following steps:

This is the lightest winter fishing box.

The assembly of a charabanc from plywood or wood occurs in a similar way. The parts are attached with self-tapping screws, and it is possible to make a compartment for gear. The lid is insulated with foam plastic or other similar material. The entire surface is sanded to avoid injury to hands and impregnated with a water-repellent mixture. This charabanc is stronger than all the others, but also much heavier.

Express option - plastic canister

The fastest production method. It is necessary to cut off the top of the container and sand the edges. Along the perimeter, for rigidity, you need to secure a metal strip with rivets or screws. Next, you need to cut out a partition and a lid from plywood, which needs to be insulated and covered with leatherette. Secure everything in its place, hang a lock.

Old freezer

This is how fishing boxes were made in previous decades. This product lasts a long time and has good durability.. It's easy to make:

With such a charabanc you can go winter fishing for many years.

Whatever the fishing box is - homemade or purchased - fishing should be fun, regardless of the weather.

Attention, TODAY only!

Winter fishing differs from summer fishing in harsh weather conditions. To get maximum pleasure from fishing and a good catch, you need to be mobile. Therefore, they try to use compact gear for quick transfer.

To optimize all equipment and fish caught, it is recommended to have a fishing box for ice fishing, which we will make with our own hands. The problem is easily solved if the layout is known and the manufacturing material is selected correctly.

Ice fishing box layout

At the first stage, the quantity and volume of gear is analyzed. They should be placed not only compactly, but also conveniently for the fisherman. In severe frost they can be obtained relatively quickly. The availability of space for catch and auxiliary space where food, thermos and other things can be placed is also taken into account.

When making a fishing box for winter fishing, the following factors should be taken into account:

Total weight of the structure. It must be optimal, since you will have to walk dozens of meters with it.
Maximum use of all space. Some of the fishing rods can be attached to the back of the lid.
Strength. They often sit on a box while fishing. Therefore, the outer part of the lid is made in the form of a seat.

Additionally, it is recommended to ensure good thermal insulation. This will maintain an optimal temperature level, but may increase the weight of the structure. A prerequisite is that the box must be sealed - no moisture should enter its interior.

Choice of material

The main problem with making your own box for winter fishing is the choice of material. Its properties and the complexity of processing at home are taken into account. Often they try to adapt ready-made structures, slightly changing their configuration and layout.

Let's consider the most popular types of manufacturing materials and their properties:

Polystyrene foam or polystyrene foam. With a low specific gravity, an easily processed material with better thermal insulation properties. Disadvantage: low mechanical strength. This especially applies to polystyrene foam. The minimum wall thickness is 30 mm, the method of connecting components is gluing.
Plywood or similar wood material. Be sure to use moisture-resistant models, as the box will be exposed to moisture. The thickness of the sheets is from 6 mm, the assembly method is mechanical (screws, nails) with subsequent sealing of the seams.
Steel or tin. You can use an old freezer or similar container as a base. It is imperative to insulate the internal walls.

Polystyrene foam can be used as a heat insulator. This is the best option as it is light in weight and easy to handle. If you plan to use adhesive compositions, they should not change their properties under the influence of moisture and low temperatures.

The procedure for assembling a box for ice fishing

The basis for a homemade design should be a correctly drawn up diagram. It is best to take a drawing of a factory box and adapt it to suit yourself. Additionally, the properties of the selected manufacturing material and the arrangement of elements inside the box are taken into account. The latter should be treated as professionally as possible, since ergonomics is the main condition for a design of this type.

How to assemble a fishing box.

Frame blanks are made according to the drawings. The manufacture of internal partitions is not carried out.
Two opposite walls are attached to the base, and then the rest.
Internal partitions are cut according to actual dimensions and installed.
Treating seams with sealant.
Installation of heat-insulating material.
If the box is made of plywood, its surface must be painted to protect it from external factors.

It is recommended to purchase a factory-made carrying belt. It should be adjustable in length and have a convenient load compensator located in the middle part. The fish compartment should be as sealed as possible. This way you can ensure that there is no unpleasant odor.

After manufacturing, it is necessary to conduct tests that are as close as possible to real winter fishing conditions. The box is filled with equipment, the correct installation and the total weight of the structure are checked. It is advisable to leave the structure in the cold for a long time to check its reliability.

A fisherman in winter can be recognized by his special box (sharaban). Often such a case hangs on a belt during transitions or serves as a seat. Although the functionality of this piece of equipment is much richer. This is a supply warehouse, a storage facility for gear, and a place for catch. There are many varieties of this product in stores. However, sometimes it is more convenient and interesting to make a fishing box for winter fishing with your own hands.

Work plan

Before starting assembly, you need to think everything through. In order not to forget anything, it is better to make a drawing of the future box. Not everyone was friendly with drawing and geometry at school, and that may have been a long time ago. However, here you will need the simplest option. The main thing is to note the main things for yourself:

Exact dimensions;
Shape;
Some details are in more detail.

To implement the scheme, you can use any convenient option. Common ones include:

When everything is more or less clear with the design, you need to think about the assembly order. This will save time and avoid unnecessary effort.

Material selection

As with other homemade products, you can give free rein to your imagination. Anything can be used as a material. The only requirement is physical fitness. It is desirable that the material be as strong and lightweight as possible.

A homemade box for ice fishing made of metal is more difficult to make. You will need skills and a lot of tools. A more common option is wood. Any breed will do. It is important to remember that you will have to carry this box yourself. Therefore, for example, oak products are rarely made. They are heavy. It's the same with chipboard.

A good option is pine. It is advisable to take boards without knots. It is difficult to hammer nails into them.

Suitable tools

It is worth taking care of the place in advance. For example, you will most likely have to work with glue and varnish. You will need to set up a table, cover it with papers and oilcloth. To make a fishing box with your own hands you will need a set of tools:

Hammer;
Nails, screws, rivets;
Pliers;
Screwdrivers;
Ruler;
Level, etc.

It is important not to forget about safety precautions. For example, gloves and a respirator may sometimes be needed.

Product assembly

After completing the drawings and procuring the material, you can begin to work. Making a good and exclusive thing is often not difficult. The main thing is not to deviate from your drawing, plan and not to rush.

Wooden box

If wood materials are chosen, the assembly will have its own characteristics. The procedure is approximately as follows:

Foam option

You can make a fishing box out of polystyrene foam. This product has advantages:

very light;
warm, which is important if you sit on it.

The product will require foam plastic with a thickness of 30 mm or more. If you use polystyrene, then 20 mm is enough. This DIY fishing box is easy to make:

A general drawing is being carried out. Plus each element, for example, the bottom, partitions, etc. - separately.
Elements are cut to size.
The parts are connected to each other in order using liquid nails.
Along the edges there is an aluminum corner. Rivets are used.
The lid design includes a piece of plywood. The size is the same. This is necessary for reinforcement, since polystyrene foam is not the most durable material.
The lid is attached to the main part with piano hinges.
Straps for fishing rods are attached to the lid, and loops for portable belts are attached to the sides of the box.
A latch is made.
The charaban is coated with a moisture protection agent.

This fishing box is the lightest of all. However, it is not particularly durable. The design takes this into account: for example, the partition simultaneously acts as a stiffener.

Plywood product

You can make a plywood fishing box for winter fishing. The order is the same as when assembling foam plastic, but there are features:

Fasteners - screws.
There is an advantage here: you can make a tackle container similar to the factory one.
The plywood cover is additionally insulated. You can take the same foam.
After installation, sanding will be required. This is necessary to protect against splinters.

Anti-moisture impregnation is also applied here. The downside of this product is its heavy weight. This “makes” it similar to the wooden model. Although both of these options are very durable.

Using a canister

Sometimes plastic is used for the fishing box. A convenient preparation is a regular canister. The operating procedure is as follows:

The top of the canister is carefully cut off.
The resulting edges are first processed with sandpaper.
Then a metal tape is “put on” them. Fastened with rivets.
A partition is installed inside. It can be made, for example, from plywood or plastic.
A cover is cut out of plywood. It is immediately insulated, for example, with leatherette and foam rubber.
The lid is attached to the former canister with piano hinges.
A latch is made.

Freezer

A well-known version of the fishing box is from the freezer. It has been popular since Soviet times, when people did a lot with their own hands, often using ingenuity and ingenuity.

Such devices have many advantages. Benefits include:

High strength;
Light weight;
Long service life.

Many copies of the “Soviet assembly” are still in use today. For some experienced fishermen, such a box is a “trusted comrade.” Although it’s not difficult to assemble another one:

The camera is removed from the old refrigerator.
Remove everything unnecessary: plastic, tubes, etc.
The bottom of the future fishing box is made of galvanized iron or plywood. It is fastened with rivets or self-tapping screws, respectively.
The cover is made of plywood. It needs to be insulated.
Then a partition is inserted inside: plywood - with self-tapping screws, metal - with rivets.
There will be loops on the side. They are fastened with rivets.
If the bottom is plywood, it is coated with a waterproof compound.
Install a lock.

Computer case

A modern version of the winter box assembly includes a computer case. Today, finding an old, unnecessary system unit is not a problem.

You will need two cases. One of them is the main one, the second is for spare parts. The box is installed like this:

The sidewalls and partition are cut out from the second body. Bend at right angles.
Holes are made in the sides and main part of the fishing box.
Everything is assembled with rivets.
The cover is cut out of plywood. It is insulated in the same way as previous box models.
The lid is attached with hinges.
Loops are attached to the shoulder strap.
The latch is installed.

There are other features of the box equipment. Here you need to proceed from your capabilities, materials and requests. All this is at the discretion of the fisherman, for example:

Additional compartments;
Skids for moving “at your own pace”;
Case.

There is no shortage of fishing boxes to choose from in stores. You can find options at any price. However, many people want to make things with their own hands. Perhaps this is the same sporting interest that leads people to fishing. Although homemade products usually meet individual wishes and are very popular with their “creators”. Often fishermen do not part with them in any season of the year.

When fishing, a man should have everything at hand, especially in winter, and for this you simply cannot do without such an attribute as a container for winter fishing. This is simply an ideal place to store all the items necessary for ice fishing.

In addition, a chest can be used instead of a chair, because sitting on a specially equipped place is much more pleasant than on a tiny piece of foam or a flimsy bucket. After all, the most important thing when fishing in winter is the ability to sit for a long time waiting for the coveted catch.

Types of fishing boxes

A fishing box for winter fishing is made from a variety of materials that have different characteristics, price criteria, and interior design. There are such fishing boxes:

Fishing chest without compartments;
A box with a designated place for a thermos;
A box with a container for gear equipped inside;
Containers with boxes intended for baits;
A box with equipped trays for placing baits and attachments;
A box with a specially designated place for catch;
A chest with overhead external compartments in which fishing rods are placed.

These different configurations of caskets are specially designed for each client depending on his needs. The box for winter fishing is made in Ukraine, Russia and other CIS countries.

Materials for making boxes

A fishing chest for winter fishing is usually made from materials such as:

Plastic;
Metal;
Styrofoam.

The thickness of the product greatly affects the quality of the chest; it is not uncommon that foam plastic lasts much longer than metal. This is due to the fact that there are soft metal alloys and a box made from them will not last for a long time.

Every year, additions to the packaging package are created, especially among them, the following stand out:

Covers for containers with straps for easy carrying on the shoulders;
Skis for fishing boxes, they are attached to the body from below and greatly facilitate movement to the fishing spot, across the snowy expanses.

Homemade boxes

But, despite the huge selection of such boxes in stores, many fishermen prefer to create a box for winter fishing with their own hands. In this case, most often they create a box for winter fishing from foam plastic.

A fishing chest you create yourself will be more convenient to use due to the fact that all compartments can be arranged depending on what is convenient for you. In most cases, when creating a box, the choice falls on polystyrene foam due to its following properties:

Resistant to wet temperatures and completely waterproof;
Light weight and high density.

If during winter fishing something goes wrong and the ice disappears from under your feet, such a chest will serve well as a life raft. To assemble such a device you will need the thickest foam you can find. Next, you need to equip the compartments; as a rule, about 5 compartments are equipped inside the box. The largest compartment is reserved for catch.

There is a compartment (pencilcase) installed right under the lid on top; fishing rods are usually stored in it. Also, don’t forget about the compartment for food supplies and a thermos with hot tea to keep you warm. You can look up how to make a box for winter fishing on the Internet or rely on your knowledge and imagination.

Once the casket has been glued together and all the compartments have been equipped, you can begin painting it a different color. Since polystyrene foam is mostly found in white, it would be extremely impractical to keep it in the same color tones. Since he can get lost very easily in the white snow.

Next, you should equip the styrofoam chest with a comfortable handle for carrying, but it is better to opt for straps, it will be more convenient to move and your hands will get less tired. Other materials used in making homemade boxes
You can also make a box for winter fishing with your own hands from materials such as:

Plywood, this type of construction is quite widely used. The only downside is that it requires modifications in terms of insulation. In addition, the plywood should be carefully processed, since there is a risk of driving in a splinter during operation. What is important is that such a casket will be very strong and durable, but, unfortunately, you will definitely have to put it on skis, because it is extremely difficult to carry around.

Plastic canister. It also requires insulation of the compartments to prevent food from freezing. In order for containers made of such material to last longer, it is necessary to select the thickest plastic possible.

A box from the freezer compartment of a Soviet refrigerator. This is a kind of hit among fishermen's caskets. Because it is extremely light, very durable, and, of course, will last a long time.
A box from a computer case. As a rule, this material is used by younger anglers.

Here, so to speak, whoever likes it best will be used in this difficult task of design. In addition, due to the constant rise in prices for fishing equipment, a homemade chest for winter fishing is becoming increasingly popular.

Selection of a box for winter fishing in a store

A winter fishing box is a very popular product. And due to the wide range of these products, it is difficult for a novice fisherman to make a choice. In this case, it is best to consult with knowledgeable people; sales consultants in the store will be happy to help and tell you everything.

And also, if any, advanced innovations have appeared, they will offer you to look at. After all, as has long been known, everything new always makes our life easier in some way, and the fishing process will become even more exciting and interesting.

But in any case, the main thing in a fishing chest is the compartments for possible devices for fishing, fishing rods, food and a thermos. You see, it’s more convenient when everything you need is in one place.

Thanks to this box, there is no need to carry bags and packages with you when going fishing, and where exactly you get the box - whether you make it or buy it - is no longer so important.

An ice fishing box along with an ice auger is an indispensable attribute of an ice fisherman. Of course, there are citizens who can sit near a hole on their knees or on a folding chair throughout the entire winter day; there are individuals sitting on an inverted bucket or a piece of foam plastic.

However, we must not forget that the winter fishing box is multifunctional. This is not only a place to sit, but also a case for tackle, and a cupboard for food, and a bar for drinks, and a container for the caught fish.

Thanks to this, the charabanc has forever entered the practice of winter fishing, and some anglers carry the charabanc with them in the summer (I’m talking about myself).

This article is devoted to the variety of boxes for winter fishing, their selection and making them yourself.

Species diversity

Without going into a description of homemade boxes for winter fishing, we will first describe factory-made charabancs. They differ in design, material of manufacture and configuration.

Structurally, winter boxes differ depending on the number and location of their compartments. Conventionally, several categories can be distinguished according to this criterion:

without branches;
with compartment for thermos;
with a container for gear;
with boxes for bait;
with an external or retractable tray for placing baits and baits;
with a hole for storing caught fish;
with external pockets for carrying assembled fishing rods.

The same box for winter fishing may contain a different set of various compartments or elements; choose the configuration that suits you best.

The choice of a specific model depends entirely on the preference of the fisherman, his financial capabilities, and often the availability of one or another sample in the nearest store.

A fishing winter box can be made from various materials. Currently on sale are charabancs made from:

plastic;
metal: steel or aluminum;
polystyrene foam

When choosing a material, carefully examine it for strength; it happens that a foam plastic ball is made of higher quality and more reliable than a metal one.

The ice fishing box can be equipped with some additional accessories for the convenience of the fisherman on the ice. This naturally leads to an increase in the price of the product, but in many cases it is justified. Among these improvements, the following additions are worth noting:

Skis. Attached to the bottom of some models of charabancs. Allows you to move it on snowy ice.
Case. Made in the form of a backpack. Allows you to carry a winter box on your back. In addition, it has additional canvas pockets like a school backpack.

Homemade charabancs

You can make a fishing box with your own hands from various materials, using items that are no longer in use or completely new material. In the practice of making charabancs, there are structures made from:

plastic;
metal;
plywood or wood;
foam or polystyrene.

In general, whoever has something, makes something from it. We will focus on the most popular models made by ourselves.

Foam

This winter box is distinguished by its lightness and warmth in relation to our buttocks and the products placed in it. The foam charabanc should be made from a material no thinner than 30 millimeters (for polystyrene, two centimeters thick will be enough).

The procedure for making such a box is as follows:

On a sheet of material we make a drawing of the elements of the box: bottom, walls, partitions, lid.
We cut out the elements along the contour.
We glue them together with liquid nails.
We trim the edges with an aluminum corner with rivets.
We reinforce the lid with a piece of plywood of the same size.
We screw the lid to the box with piano hinges.
We install straps on the lid for transporting fishing rods.
We attach belt loops to the sides of the charabanc.
We rivet the locking device.
We cover the box with a water-repellent compound.

It should be noted that in this design, the partition not only divides the ice fishing box into two compartments, but also serves as a stiffener. The foam box is the lightest of the presented homemade products.

Plywood

The general principle of manufacturing this box is similar to the previous version, only screws, rather than glue, are used to fasten the elements. In addition, in a plywood version in a charabann, you can additionally make a container for gear similar to the factory model.

When making a plywood box, it is worth additionally insulating the lid with foam plastic or other heat-insulating material. After completing the assembly of the charabanc, it should be thoroughly sanded to avoid splinters and coated with water-repellent impregnation. At the end of the work, we attach a latch or lock to the box.

Unfortunately, a charabanc made of plywood or wood is the heaviest fishing box, but it is also the most durable.

From a canister

This is generally a simple option; to make such a box you will need a large plastic canister.

Here's how quickly it can be made.

Cut off the top of the canister.
Sand the edges with sandpaper.
We frame the edges with metal tape and rivets.
We install a partition made of plywood or durable plastic inside the canister.
Cut out a suitable size lid from a sheet of plywood.
We insulate it, for example, with a combination of foam rubber and dermantine.
We attach the lid to the canister using piano hinges.
We attach the latch.

From the freezer

One of the hits in the manufacture of fishing winter boxes since Soviet times has been considered a charabanc made from a freezer. It turns out to be light, strong, and durable. Some veterans do not change them all their lives.

Making such a charabanc is very simple:

We tear out the camera from the refrigerator.
We cut off everything unnecessary from it, tubes, plastic and whatever else is there.
We cut out the bottom from plywood or galvanized iron and fasten it with rivets or self-tapping screws.
We cut out the cover from plywood and insulate it using one of the methods given above in the text.
We insert a partition inside the box for rigidity: we fasten the plywood partition with self-tapping screws, and the metal partition with rivets.
We rivet the hinges to the edge of the chamber, which we fasten to the lid with screws.
We rivet the fastenings for the straps to the sides of the charabanc.
If the bottom is made of plywood, we treat it with waterproof impregnation.
We attach some kind of lock on the front.

From a computer case

In our age of scientific and technological revolution, all landfills are filled with decommissioned computers. To make a charabanc from a PC case, it is advisable to take a model in which the lid and sides are one piece.

We will need the second body for the manufacture of end sides and stiffeners, partitions. The process of assembling a computer charabanc is as follows:

Cut out the sides and partition of the drawer.
We bend it at a right angle to connect it to the base.
We drill the necessary holes for rivets in the base and side parts.
We assemble the box using a riveter.
We cut out a cover from plywood and insulate it.
We connect the lid to the box with hinges.
We attach the loops under the belt and screw the latch.

In addition

We did not describe how to make additional containers in the charabanc, cut a hole in the box for storing fish, or attach straps and latches. The homemaker must decide on this choice himself, based on the materials of manufacture and the available accessories.

In addition, we did not describe attaching skis or any runners to the caravan for transportation. There is no description of production and a story about how to make a cover for a foam or polystyrene box.

Go for it, and your charabanc will take its rightful place among the best fishing crafts!

It might be useful to read: