Salmon flies on a single hook. Step-by-step instructions for tying flies with your own hands. DIY making

Artificial flies have been used as bait for quite some time. But recently, the popularity of flies has begun to gain momentum. They are used not only in fishing, but also in spinning fishing, or as an addition to spinners in winter fishing, in a word, this bait is becoming more and more in demand. There is a large assortment on sale. You can buy the necessary fly for fishing and not very expensive. Or you can do it yourself. Often the desire to make a fly with your own hands is dictated not by savings, but by the opportunity to create the ideal bait and please the fish.

Since the art of fly tying has been known for a long time, many models of such baits have already been invented. Exact instructions have long been described according to which you can make almost any insect. There are specific names for various parts of the front sight, with the help of which a description of a particular model is made. Among those who knit flies, each model made by hand is a piece of goods, so homemade flies are highly valued.

Cheap store-bought flies made of polyethylene, rubber, and plastic are immediately recognized by fish, and they do not react to them. Therefore, flies made from natural materials are highly valued.

Now you have accumulated a lot of experience and, having acquired a high-quality set of tools and materials, you will be able to repeat the author’s developments according to the description.

I think that if you decide to take up professional fly tying, you should definitely buy tools. They are not cheap, but you will have your own unique lures. These tools have become available to a wide range of fly fishing enthusiasts not so long ago.

Knitting tool set includes:

A vice or vise is needed to secure the hook on which you will tie the body of the insect.
Mounting thread.
Knot twister.
Scissors.
Pen clips.

And this is not all accessories listed.

Materials

Materials used:

Feathers of rooster, peacock, various birds.
Wool of a boar, squirrel, badger.
Wool threads, floss, mohair.
Lurex.
Beads, garus.
BF glue, tsaponlak.

Tying flies is a painstaking task. For those who do this, this is a definite hobby. Tying a quality fly is not easy. Even the fact that searching for material will take a certain amount of time, because it is not so easy to find peacock feathers or badger bristles.

Which insect to tie

The most important thing, and this is aerobatics, is to tie such a fly so that it is as similar as possible to the insect it imitates. Knit:

Beetle.
Grasshopper.
Mayfly.
Moth.
Dragonfly.
There is a series of flies called frigates.

Non-professional knitters usually look at how the fly looks in the store, and try to give the same shape to their model.

Classification of flies

I also want to clarify for those who are encountering this type of bait for the first time that there is a division of fly fishing flies into several types.

There are flies:

Dry - which must glide on water, they are similar to representatives of insects gliding on the surface of water:

Wet - which will resemble a drowned fly:

Nymphs are larvae or invertebrates crawling on the bottom that live in water:

Emergers are insects in a transitional period that are preparing to become adults.

Streamers are baits similar to fry and shrimp that frolic in the upper layers of warm water:

Fantasy - insects that do not exist in nature, which appeared only thanks to the author’s imagination, but this makes them no less catchy:

Fantasy

We watch the video and tie the “Alexandra” fly, you can use it to catch ide, chub, asp:

How to tie your first fly

In any case, to knit, you must have your hands free to carry out the manipulations. Therefore, secure the hook in a small vise or jaws, and, in turn, clamp them in a larger vise.

You will knit on the shank of the hook. Start from the middle of the hook bend. First, wind the crochet thread tightly in two rows along the shank. It is easier to glue and attach feathers and other elements to this base. Take a bird feather, a smaller one, which is located on the neck and sides, and tie it to a hook with thread. As a result, the body of the hook will be hairy. To prevent the thread from unraveling, it is secured with special knots. The insect's head is also made from knitting thread. Take a larger and stiffer feather and wrap it perpendicularly, these will be the wings. Cut off any excess with scissors. Don't forget to tie on the tail for the fly. The tail serves as a guide for the fish to bite. The tail can be a piece of woolen thread.

Flies are not white, so they use different colored tying thread and different feathers. White feathers can be painted with aniline dyes. The fish reacts very much to various shiny threads.

Flies for different fish

The production of flies for fishing is differentiated. There are flies for, there are for asp, and so on. There are never too many flies. There is no universal and most catchy one. Different conditions require different flies. The same fish prefers variety at different times.

For example, it is difficult to select a fly for a single asp. No matter how you look at it, there is a fluffy fly in front of his nose, and he often refuses to take it. try streamers or wet flies. In sunny weather or in the upper layers, he prefers dim baits. But in cloudy weather, shiny baits will be better. Smaller asp specimens bite better on a fly. The video shows how to knit a streamer for an asp

For grayling, the color of the bait is very important. Grayling even distinguishes shades of color. But in more turbid water, light perception becomes worse. In muddier water, baits should be contrasting. The peculiarity of grayling is that it likes to rise to the upper layers, and therefore will prefer dry flies. Since it feeds on small insects, the flies for grayling should be small. The next type of bait for grayling is emergers.

Look at the video of how to knit a caddisfly:

Fishing methods

The methods of fishing with these baits are dictated by the behavior of the insects they copy. With a dry, lighter fly, they fish in a reservoir where the current is calmer, the fly touches the water, if there is no bite, a recast is made. When fishing with a wet fly, it should be heavier than the water; it can be either in a strong current or in standing water. The wet fly should sink, then, pulling up the fishing line, lead the bait near the bottom.

There is a method of fishing with a float and flies. A bombard or is used as a float. It turns out to be a symbiosis of fly fishing and spinning.

Turbo flies - a recently introduced type of bait with a propeller - are most suitable for fishing with a sbirulino float. It is especially good to catch perch with a float using this tackle.

Some consider the wabik to be a fly, which is used to successfully catch asp, chub, pike and other fish. This type of bait is not a fly. It most likely imitates prey that chases after the spoon and stimulates the predator's hunting instinct. Wabiki have been known for a very long time, even in pre-revolutionary Russia, but they are successfully used today.

But still, no matter how super similar the fly is to its prototype, the result of fishing depends on the skill of the fisherman, how he uses this bait, how he serves it. Fishing with a quality fly will not bring results if the fisherman is inexperienced.

Folk sign: The wind that blows downstream is not conducive to fishing; the fish bite will be bad.

Fishermen have been using artificial flies for a long time. This equipment is considered universal, since it is suitable for fishing for various types. Fishing flies have a high catchability. In addition, with them, the fisherman does not need to regularly purchase new baits. Despite the presence of branded equipment on the shelves of specialized stores, many fishermen prefer to use handicraft products. According to experts, homemade flies are no less catchy. Moreover, judging by numerous reviews, it is much more pleasant if the fish is caught using bait you made yourself. You will find information about the types of these baits and how to make flies for fishing in this article.

Getting to know the equipment

Flies or streamers are artificial baits that imitate insects or their larvae located both at the edge of the water and in any layer of it. The equipment is designed for fly fishing or using a spinning rod. According to experts, using flies, you can fish in any way in a wide variety of water bodies. Judging by the reviews, many novice fishermen are interested in how to make such bait at home and how to tie a fly to a fishing line.

About types of bait

Artificial flies for fishing are:

Wet. The bait is practically no different from a drowned insect, leech, tadpole or larva. The product is characterized by a thin body, the presence of a tail and legs. This type of equipment is used when fly fishing for salmon and grayling. The bait is effective from June to November.
Dry. The purpose of the bait is to imitate a dragonfly, fly or gadfly. To prevent these baits from being submerged in water, non-sinking materials are used for their manufacture, and thin wire is used for hooks. Lures float on the surface of the reservoir and are used for fishing in the upper layers. These flies are designed for chub, rudd, roach and other fish species.

Streamers. They are considered the heaviest artificial baits. They resemble fry that are part of the food supply of underwater predators. Judging by the reviews, grayling bite well on the streamer.
Emergers. These baits imitate insects turning from pupae to adults.
Nymphs. This species is a bait in the form of an insect at an early stage of development. Those who decide to make such a fly should not make mistakes with the color, size and segmentation of the body. Salmon and grayling bite well on nymphs.

Knowing the technology and having the necessary tools and consumables, making such artificial baits will not be difficult.

Tools

To work, the home craftsman will have to acquire the following materials:

With a vice. Necessary for reliable fixation of fishing hooks.
Pen holder.
Scissors.
A set of needles.
With tweezers.
Special holder for spools of thread. It is important that the thread is well tensioned while working.
Brush for painting and varnishing.
Mortar.
Lamp.
Magnifying glass.
A mirror.
Carding needle. With its help, everything unnecessary is removed from the workpiece.

About consumables

The bait will turn out more natural if you use:

Yarn. Both woolen and polypropylene and fur threads are suitable. Many masters pre-treat it with a comb. It is necessary that the ends of the thread are slightly thinned. You will also need a rubber thread. Its presence will give the bait body the necessary flexibility.
Lurex. This material is recommended for those who are planning to make fly fishing flies. Thanks to Lurex, the body of the bait is more shiny.
Wire. According to experts, there is only one type of bait made entirely of this material. Among fishermen the tackle is known as the Cooper John. These fly fishing flies are made exclusively from wire. However, in all other types of bait, wire is used as an additional material.
Bird feathers. Before use, they are pre-painted and coated. In addition, part of the barrel in the feather needs to be exposed. Next, it will be wrapped with thread and wire.

If desired, the home craftsman can use beads, beads, fluff, various rings and wool.

Progress

You can make an artificial fly as follows:

First, a fishing hook is secured in a vice.
Next, you need to firmly fix the mounting thread and wind it along the hook. The remaining thread is cut off.
Make the base of the body. At this stage you will need a wool thread. The place where it will be attached will be the middle of the forend. As it winds, the body thickens.

Make wool fibers. After winding around the mounting thread, they are tied into a knot and coated with varnish.
You will have to wait some time for the varnish to dry. Then wrap the bristles with lurex. This should be done in the opposite direction from the angle of the bristles. Carefully cut off the remains.

What should you pay attention to?

In order for fishing flies to resemble an insect as much as possible, the design of the product must be equipped with a head, abdomen, wings, legs and bristles. The head should be made massive and then varnished. The body of the bait is brightly colored. At the end of the work, the product is tested by throwing it into water. The purpose of these actions is to check how the bait will get wet, how its color will change and how it will float on the water. Fly fishing flies can come in a variety of colors and shapes. Using your rich imagination, it will not be difficult to make both a fly and a larva.

How to make a dry artificial fly?

Judging by the reviews, coping with this task is quite simple. For work you will need 5-centimeter wools. Experienced fishermen recommend giving preference to black or bright orange colors. Next you will need to equip the hook with hairs. Hooks used in spinners are suitable for bait. After the hook is removed from the bait, several hairs are threaded into its ring, which are fixed with a cambric.

To do this, you need to place it on the hook ring. Using a needle or tweezers, the fly is fluffed up. Due to the fact that the process of making such bait is not labor-intensive, many fishermen make flies directly on the pond itself before fishing. Judging by the reviews, the use of hairs of eye-catching colors has a positive effect on bites. These flies are mainly used for chub. Pike and perch also bite well on dry bait.

About the pike streamer

This bait is suitable for densely overgrown reservoirs. The design may contain either an open or non-hooking hook. Some fishermen use it together with floats. If you plan to use the bait separately, then it is better to equip the leash with a small weight. In this case, casting will be much easier. To make a fly you will need a feather, lurex, hairs and hook No. 10. The work is carried out in several stages:

Using thread, attach the lurex to the hook.
Fluff the material with an awl or needle.
Attach a feather to the hook and wrap it with thread.
Fix the structure with varnish.
Cut off excess threads.

When choosing hairs, you need to remember that too bright colors will look unnatural and scare away the pike.

How to tie a fly to a fishing line?

According to experts, the presence of bait in the form of a dry fly already guarantees successful fishing. However, in order for the fish to bite, the bait must be tied correctly. Experienced fishermen recommend hooking dry baits to the line using a Dunkan loop or Turle Knot. If you have to fish with wet ones and nymphs, then it is better to use Droper Loop or Rapala knots.

About the advantages and disadvantages

The advantages of artificial baits are their versatility, reliability and durability. Judging by the reviews, flies do not fly off the hooks during long casts. In addition, these baits have a long service life. Unlike handmade flies, branded flies are of lower quality. To make artificial bait at home, you will need inexpensive materials, which is considered an important advantage of homemade flies. The downside is that they take a lot of time to make. However, according to experienced fishermen, as you gain experience, making artificial bait becomes much easier.

When fishing with a fly, it is not advisable to use a rod that is too long. The best option is a 2.5-meter tackle. Before throwing artificial bait into the water, apply a water repellent to the product. Most fishermen treat their flies with silicone oil and alcohol. When tying baits, preference should be given to high-quality non-bending hooks.

Fly fishing flies are a good bait for the inhabitants of the reservoir. Thanks to the use of lightweight materials, the bait naturally lies on the water surface. Some hooks are released upward. This makes it possible to perform fast and powerful sweeps. However, there is a risk that the fish will see the ring with the leader. This may scare her away, and there will be no bite. If you hide the hook, the hook will be weaker. Each fisherman decides for himself how to tie the bait to the fishing line.

Since ancient times, fishermen have used baits for fishing that imitate various insects or bugs that inhabit rivers, lakes, ponds and other bodies of water. As a rule, such insects are the main food of many fish, and they excellently caught on imitation baits. Such baits are called flies, and they are quite catchy. The presence of flies will give the fisherman the opportunity not to think about where and how to purchase bait every time he goes fishing. Moreover, with a little practice, you can constantly tie your own flies, thereby providing yourself with catchable baits.

Using this fishing method, you can catch any fish, such as ide, etc. In the summer, the fish feed on insects that fall into the water, as well as various types of mayflies and worms that are found in the silt of reservoirs. You can use flies all season, from spring to late autumn.

Artificial baits in the form of flies have versatility in their use. In addition, they are convenient to work with, and you can catch both predatory and peaceful fish. You can find several main types of artificial baits of this type.

They imitate drowned insects. They are distinguished by a thinner body, as well as the presence of legs and a tail. As a rule, such flies are used to catch fish such as grayling or salmon.

These baits imitate adult flies, gadflies, dragonflies, etc., which somehow ended up in the water. Non-sinking materials are used for their manufacture, so such flies are always on the surface of the water. They are made on the basis of thin hooks so that the bait has minimal weight. Roach, rudd, chub, etc. react to such baits.

They look like underwater insects in development. They are good for catching grayling and salmon. The more believably the fly imitates an insect, the more effective the fishing will be.

A special type of bait that imitates insects that are at the stage of turning a pupa into a full-fledged individual.

This bait differs in that it resembles a fish fry, which is used to catch predatory fish, such as grayling. Such flies are very difficult to make, as they require special skill. As a rule, such a fly is used for catching predatory fish.

Necessary materials and tools for making flies

To learn how to make flies with your own hands, you should stock up on certain materials and tools. Tying flies is not very difficult and can be done by any amateur fisherman. As a rule, the fisherman already has most of the necessary tools, because without them it is impossible.

To tie flies you will need the following tools:

vice;
needles;
knotweed;
overexposure;
scissors;
threader;
bobbin thread holder;
tweezers;
magnifying glass;
mirror;
lamp;
mortar;
brush.

To do this you will need the following materials:

Hooks. For tying flies, you should purchase special hooks, but you can also use regular ones: for dry flies, use hooks made of thin wire, and for other types of flies, thicker ones.
Bird feathers. As a rule, rooster feathers are used.
Dabbing.
Wool.
Lurex.

DIY dry fly

To make a simple fly, you will need several brightly colored hairs, about 5 cm long. It is preferable to use a bright black or bright orange tint. The hook is removed from the spoon and the hairs are threaded through the ring, which are fixed on the hook using a cambric. After fixing the hairs, they can be fluffed using a needle or other sharp object.

This is the simplest fly that requires a minimum amount of time and a minimum of materials used. It can be made directly while fishing or before going fishing. The use of bright colors allows you to increase the catchability of the bait. This fly can be used for catching perch, as well as pike at shallow depths.

DIY pike streamer

In the summer, aquatic vegetation grows rapidly, so many reservoirs become overgrown, making it impossible to use conventional baits. In this case, non-hooking baits are better suited, which increase the chances of catching fish, since most fish species prefer to be in thickets of aquatic plants. Some hide in the thickets from predators, while others ambush representatives of peaceful fish. Many anglers use a pike streamer, both with a regular hook and with a non-snag hook. Such baits can be used in tackle with a Sbirullino float or in regular tackle. To facilitate the casting process, it is worth securing the appropriate weight on a separate leash.

The basis of any fly is a hook, somewhere around size 9 or 10. It is possible to use a special hook with . In addition to the hook, you will need wool and a piece of lurex.

First, a piece of lurex, about 5 cm long, is wound to the shank of the hook. After this, the lurex must be fluffed using a needle or other sharp but thin object. Using the same thread, a rooster feather is attached on top of the lurex. You can use wool of different colors, but no more than five, since the presence of a large number of shades on the bait can scare away the fish. After this, the thread should be secured with nail polish. After fixing the product, the hairs are fluffed out using an awl or needle. The bait is ready for use.

This streamer catches perch perfectly if you additionally attach a certain weight to it. This bait will please the amateur fisherman with its effectiveness when catching pike or perch in the middle of autumn.

Video - instructions for making a front sight

On the Internet you can see many videos that tell and show how certain flies are tied. Among this variety you can find a video about tying a Mayfly fly. Its production is quite simple and does not require the use of expensive materials and unique tools. The mayfly fly is tied on hooks of various sizes, which allows it to be used for catching most types of fish.

Disadvantages and advantages of artificial flies

Artificial flies have a number of advantages, compared to other types of bait. They are simple, reliable and, at the same time, versatile, which allows them to be used for catching almost all types of fish. Moreover, flies are durable, so you can provide yourself with such baits for a long time if you make them yourself.

Another factor that is decisive when making them yourself is the low quality of flies purchased in the retail chain. Of course, you can find branded copies of well-known companies, but they are quite expensive, although they are catchy. Many fishermen buy store-bought products, but most try to make them themselves, especially since, apart from a hook, nothing in short supply is required. All that is required is desire and perseverance, since making some flies takes quite a lot of time. In addition, you will need a creative approach, otherwise you will not be able to tie a good, high-quality fly.

Artificial flies have one drawback, which boils down to the fact that you need to spend a lot of time learning how to tie really catchy lures. Despite the apparent simplicity, one initially gets the impression that everything is really very simple. Unfortunately, it’s just everything for those who do nothing. As for fly tying, it is responsible, meticulous and hard work. In addition, this process is quite interesting, just like the fishing process itself. Real enthusiastic fishermen prefer baits made with their own hands in a home workshop. Oddly enough, such baits are more catchy than some specimens, especially cheap copies that are sold in fishing stores. This speaks of a creative approach and high craftsmanship, especially since every fisherman is very interested in seeing how his work of art works.

Flies, or streamers as they are also called, are artificial bait that is used to catch fish using fly fishing or spinning fishing.

Flies are insect imitators. They can swim both on the surface of the water and in a certain layer of it.

Such baits have the following features:

they perfectly imitate food, which many predatory fish look for at the very surface of the water;
such baits, unlike plant and animal baits, can be used repeatedly, and at the same time do not lose any of their attractiveness to fish;
flies are very easy to store and transport, since they do not require certain temperature conditions;
flies can be very different, which gives the fisherman the opportunity to use his imagination and do experiments when making them.

You can use flies at any time of the year, but they are considered the most effective in the summer, when there are many live insects and the fish, knowing this, collect them on the water.

According to buoyancy, flies are divided into the following types:

Floating flies on the surface that do not sink at all. They are commonly used for fly fishing. These flies are made from very light materials: plastic, hair, foam and feathers. Besides. Floating flies can be divided into two categories: sliding and . Sliding baits glide across the surface of the water as if on ice, and poppers, when in the water, make sounds that are very similar to the noise of crickets.
Floating flies that sink when pulled through. They also have another name - divers. Fishing with such baits can be done in any body of water at any depth, which makes them very convenient and practical.
Sinking flies that float in layers of water. They are also often called "swimmers". These baits can come in a variety of sizes, weights and colors, so fishermen can safely use all their imagination when making them.
Sinking flies that sink very deep into the water. They swim almost at the very bottom of reservoirs, attracting especially large predatory fish.

You can use flies to catch the following types of fish:

trout;
asp;
grayling;
salmon;
perch;
chub;
roach;
saberfish;
bleak.

In addition, flies can be classified according to their varieties:

wet;
dry;
nymphs;
emergers;
streamers.

Wet flies - These are baits that look like a drowned beetle or insect larva. They have a thin body and attached legs and tail, which adds to their natural appearance. Wet flies are commonly used to catch salmon and grayling. They are fished from summer to late autumn.
Dry flies look like flies or wasps that have fallen onto the surface of the water. They are made from lightweight materials that float well on the water, so such baits can “sit” on the water for a long time and not sink. Dry flies are used for catching chubs, roaches, sabrefish and other types of fish.
Nymph baits are artificial insects at certain stages of underwater development. Most often they are used for catching perch and trout. To make such a bait, you must strictly follow the recommendations for the required color and size of the fly.
Emergers are baits, imitating an insect that is just beginning to transform from a larva into an adult.
Streamers outwardly hunt small fish or large beetles. They are the most difficult to manufacture among all other types of flies. Most often, streamers are used to catch asp.

Do it yourself

To make flies you should use the following tools:

scissors;
vice or clamps;
feather holder;
needles;
threads;
spool holder;
tweezers;
brush;
lapma;
magnifying glass or magnifying glass;
mirror;
mortar.

The most commonly used materials for making flies:

hooks (especially for flies, they are thinner than regular ones);
feathers (from rooster, goose or duck);
wool;
Lurex;
glue;
thread for installation (it is better to use silk);
dabbing.

Most often, flies depict the following insects:

caterpillars;
butterfly pupae;
flies;
mole;
gadflies;
spiders;
beetles;
grasshoppers;
dragonflies;
ants;
larvae;
mayfly

The general principle of making flies looks like this:

Remove the hook from the spoon and pull a few hairs through the ring.
Using a cambric, secure the hairs in this position.
Place the cambric on the hook ring.
Using a needle, fluff the hairs so that they become more voluminous.

Flies for different fish

To make a fly for perch, you should take the following materials:

hook number seven;
one bright feather;
a small bundle of woolen threads up to four centimeters long;
nail polish;
nylon rope.

Wrap the thread around the hook several times.
Attach the feather by its tip to the hook using nail polish or regular glue.
Attach wool threads.
After the varnish has dried, use a needle to fluff the fly.
If the threads are very long, then they need to be trimmed a little with scissors.

To make a fly or wabik for an asp you will need:

four thick hairs;
glue;
needle;
hook number four.

1. Wrap the hairs to the shank of the hook closer to the ring.
2. Secure them with glue.
3. Fluff the wabik with a needle.

This bait is very effective for catching asp together with the Sbirulino rig.

Wabik takes no more than four minutes to make, so fishermen can make large quantities of them. In addition, such a front sight lasts a very long time.

To make a pike fly or streamer, you will need:

weight (weight no more than three grams);
hook number ten;
lurex bright;
multi-colored hairs;
rooster feather;
threads;
glue.

Tie lurex thread to the hook.
Glue the rooster feather.
Using a needle, fluff up the lurex and the bait is ready.

This fly sinks very slowly. Therefore it is ideal for use in grass ponds.

For long casts it can be equipped with a small weight or a special float. A streamer is used to catch pike in the fall.

To make dry types of flies, you need to use stiffer and more elastic feathers.
To make wet types of flies, you should use soft and fluffy feathers.
It is best to use the following colors for flies:
- brown;
- red;
- green;
- white;
- yellow;
- brown;
- crimson.
It is better to use feathers from an old rooster as they are of better quality.
The best feathers are considered to be narrow feathers that are not fastened together with synchronous edges.
The size of the flies should be used depending on the type of fish they will be used on. For small fish, the size of the fly should not be more than three centimeters. To catch large fish, the size of the fly can reach six centimeters.

Features of making flies

Making flies has the following features:

When making flies, you should avoid large knots or make them as invisible as possible so that the fish cannot see them.
If you are making a fly with legs, then they need to be placed at the same level so that they are as similar as possible to real insect legs.
Already made flies need to be washed in water with added soap. This will remove the glue smell.
It is better to use thread in dark shades so that when wet it does not show through and does not create the impression of an empty, inanimate insect that the fish will not peck at.
During the warm fishing season, it is better to use bright colors of flies that will attract fish from afar.

When making flies, care should be taken to ensure good lighting so that you can see everything clearly and avoid mistakes.
When making flies there is no need to be afraid of using very small hooks as they are also effective.
All excess or too long materials must be removed with scissors, otherwise the fly will not “sit” well on the water.
The turns of thread should be done as little as possible.
The thread must be pulled very tightly, otherwise the entire design of the fly will be unreliable.

In this article I will describe my low water salmon flies in more detail. The information will be updated and supplemented, and I will post new options for low water here.

All specific materials used in my flies can be ordered from our store (unfortunately, I cannot quickly post such a large number of products, so for now it’s easier to find out and order by phone, also follow our group Everything for fly fishing in Murmansk - In Contact - https://vk.com/sokolflyfish)

Salmon fly Toad Zhaba Red Rib Variant

A modern, modified version of my "Toad". It can be used in all weather conditions in low water and is quite versatile. It fishes in almost all rivers, not only in clear, but also in slightly peaty water. High light and color contrast, the fly is clearly visible in the water in any lighting.

Hook:
Tip: Oval silver lurex
Rear:
Tail:
Thickening:
Body:
Ribs: Oval red lurex
Wing: Winter Siberian squirrel fur (dark brown), two segments of Gadwell Barred Flank feather in Wood Duck color or drake feather
Throat: The rooster feather is a dark brown color with soft barbs (I use small feathers from a Whiting rooster saddle)
Cheeks: Jungle rooster
Head:

Salmon fly Toad Zhaba

This is how I tied it before, this is the simplest option, which I have been fishing with since 2002 on many rivers of the Kola. It is also universal, works almost always and everywhere. When photographing, I had a fly on a small hook on hand, so it looks ugly in the photo... I'll fix it over time.

For low water, this option is crocheted on hooks No. 6, 8 with a short shank. Since hooks from different manufacturers with the same number can have different dimensions, just in case I give the hook length in mm. The photo shows hook No. 6, 24 mm long.

Hook:
Tip: Oval silver lurex
Rear:
Tail: Winter Siberian squirrel fur (dark brown)
Thickening: Dabbing Ice Dub in Black Peacock
Body: Bright green dabbing
Ribs: Oval silver lurex
Wing: the beards of the rooster's feathers are poisonous green and red-orange (I use feathers from the scalp of the Whiting Coq De Leon rooster here, they are a little stiffer, glassy, shiny), the fur of the winter Siberian squirrel (dark brown)
Throat: Natural Badger colored rooster feather (dark center feather, light brown barb tips) with soft barbs (I use small feathers from a Whiting rooster saddle)
Cheeks: Jungle rooster
Head:

Salmon fly Toad Zhaba Chartreuse Variant

Very bright fly, good for Kola, Ura and many other rivers for light weather, works well in sunny weather. It can be very helpful when the water rises due to heavy rains or when, during warm weather in July, the water begins to bloom and the transparency of the water decreases.

Hook: Veniard Osprey, Partridge Patriot, Black Nickel hook color
Tip: Oval silver lurex
Rear: Red-orange mounting thread UTC 210den. It is much stronger than silk and the fly can withstand more bites.
Tail: the beards of the rooster feather are poisonous green in color (I use feathers from the scalp of a Whiting Coq De Leon rooster here, they are a little stiffer, glassy, and shiny). On top of the rooster's wattles are two strips of thin twisted lurex Midge Flash in poisonous lemon color
Thickening: black ostrich feather beard on hooks No. 6, peacock feather beard on hooks No. 8-10
Body: Uni Stretch Chartreuse, spindle shaped.
Ribs: Oval red lurex
Wing:
Throat: Rooster feather, poisonous green (here I'm using a Whiting Coq De Leon rooster scalp feather, bleached and dyed, with shiny glassy barbs)
Cheeks: Jungle rooster
Head: Black mounting thread and transparent UV varnish of our own production

Salmon fly Toad Zhaba Pearl Sunny Variant

This is an even brighter and more contrasting bright fly, also good for Kola, Ura and many other rivers for light weather, works especially well in bright sunny weather.

Hook: Veniard Osprey, Partridge Patriot, Black Nickel hook color
Tip: Oval silver lurex
Rear: Red-orange mounting thread UTC 210den. It is much stronger than silk and the fly can withstand more bites.
Tail: On top of the rooster's wattles are two strips of thin twisted lurex Midge Flash in poisonous lemon color
Thickening: black ostrich feather beard on hooks No. 6, peacock feather beard on hooks No. 8-10
Body:
Ribs: Oval silver lurex
Wing: Winter Siberian squirrel fur (dark brown), two segments of Gadwell Barred Flank feather in Wood Duck color or drake feather
Throat:
Cheeks: Jungle rooster
Head:

Salmon fly Toad Zhaba Orange Variant

The fly, aimed at fishing in water with a peaty tint, is good for summer and early autumn in the rivers of the Tersky coast, and on the northern bank it will help out during the summer bloom of water or when it carries turbidity during a rain flood. It has also been noted that when fishing in early autumn, this fly attracts dark fish.

Hook: Veniard Osprey, Partridge Patriot, Black Nickel hook color
Tip: Oval silver lurex
Rear: Red-orange mounting thread UTC 210den. It is much stronger than silk and the fly can withstand more bites.
Tail: the beards of the rooster feather are poisonous green in color (I use feathers from the scalp of a Whiting Coq De Leon rooster here, they are a little stiffer, glassy, and shiny). On top of the rooster's wattles are two strips of thin twisted lurex Midge Flash in poisonous lemon color
Thickening: black ostrich feather beard on hooks No. 6, peacock feather beard on hooks No. 8-10
Body: Uni Stretch Chartreuse, spindle shaped.
Ribs: Oval red lurex
Wing: Winter Siberian squirrel fur (dark brown), two contrasting teal feather segments
Throat: The rooster feather is a fiery orange color (here I'm using a Whiting Coq De Leon rooster scalp feather, bleached and dyed, with shiny glassy barbs)
Cheeks: Jungle rooster
Head: Black mounting thread and transparent UV varnish of our own production

Salmon fly Toad Zhaba Blue Variant

The blue color is noticeable, aggressive, and attracts fresh fish well, especially when fishing in the lower reaches of rivers. A fairly universal all-weather fly, it works on various Kola rivers, and is especially good when catching freshly entering fish.

Hook: Veniard Osprey, Partridge Patriot, Black Nickel hook color
Tip: Oval silver lurex
Rear: Red-orange mounting thread UTC 210den. It is much stronger than silk and the fly can withstand more bites.
Tail: the beards of the rooster feather are poisonous green in color (I use feathers from the scalp of a Whiting Coq De Leon rooster here, they are a little stiffer, glassy, and shiny). On top of the rooster's wattles are two strips of thin twisted lurex Midge Flash in poisonous lemon color
Thickening: black ostrich feather beard on hooks No. 6, peacock feather beard on hooks No. 8-10
Body: Uni Stretch Chartreuse, spindle shaped.
Ribs: Oval red lurex
Wing: Winter Siberian squirrel fur (dark brown), two contrasting teal feather segments
Throat: Badger rooster feather in Silver Doctor Blue (here I'm using a Whiting American Cape Budger rooster scalp feather, dyed without bleaching), here it is used to separate the chartreuse body and blue throat with a dark stripe, the blue and chartreuse have a slight color reciprocity contrast and merge if they are not separated in this way.
Cheeks: Jungle rooster
Head: Black mounting thread and transparent UV varnish of our own production

Salmon fly Green Shrimp

A bright fly for sunny weather, good for summer fishing in acceleration and jerking with strips, fishing in all rivers of the Kola.

Hook: Veniard Osprey, Partridge Patriot, Black Nickel hook color
Tip: Oval silver lurex
Tail: Bucktail of a poisonous green color, 2-3 strips of a thin poisonous green twisted Midgeflash, on top of the tail a small feather of a diamond pheasant of a poisonous green color
Rear: Red-orange mounting thread UTC 210den. It is much stronger than silk and the fly can withstand more bites.
Thickening: black ostrich feather beard on hooks No. 6, peacock feather beard on hooks No. 8-10
Body: Uni Stretch Chartreuse, spindle-shaped, and on top of it is a translucent mother-of-pearl flat lurex UTC Mirage Opal Tinsel
Ribs: Oval silver lurex
Wing: Diamond pheasant feather of poisonous green color
Throat: The rooster feather is a poisonous green color (here I use a Whiting Coq De Leon rooster scalp feather, bleached and dyed, with shiny glassy beards) to contrast the throat with the orange head of the fly, here a thickening of an ostrich feather beard is used.
Cheeks: Jungle rooster
Head: Orange mounting thread and fluorescent fiery orange UV varnish of our own production

Salmon fly Cargo Blue Variant

This name was given to this fly by Yuri Shumakov during our joint fishing in 2003. Then we actually knitted the body from blue packing rope, which was reflected in the name))), there was no lagartoon at hand. Works well in bright, sunny weather for freshly entering fish, moderate contrast, but very noticeable in the water. Works on most Kola rivers.

Hook: Veniard Osprey, Partridge Patriot, Black Nickel hook color
Tip: Oval silver lurex
Rear: Red-orange mounting thread UTC 210den. It is much stronger than silk and the fly can withstand more bites.
Tail: the beards of the rooster feather are red-orange in color (I use feathers from the scalp of a Whiting Coq De Leon rooster here, they are a little stiffer, glassy, shiny).
Thickening: black ostrich feather beard on hooks No. 6, peacock feather beard on hooks No. 8-10
Body:
Ribs: Oval silver lurex
Wing: A mixture of yellow and orange-red bucktail, 2 strips of thin poison-green twisted flash Midgeflash,
Throat: Badger rooster feather in Silver Doctor Blue (here I'm using a Whiting American Cape Budger rooster scalp feather, dyed without bleaching), for fly variants with a bright orange head I often use this feather, it enhances the contrast.
Cheeks: Jungle rooster
Head: Orange mounting thread and fluorescent fiery orange UV varnish of our own production

Salmon fly Pearl Blue

A very catchy fly on many rivers, especially in recent years (2014-17), when the summer did not indulge in constant, stable hot weather, it showed itself best during summer fishing in conditions of cooled, cool water.

Hook: Veniard Osprey, Partridge Patriot, Black Nickel hook color
Tip: Oval silver lurex
Rear: Red-orange mounting thread UTC 210den. It is much stronger than silk and the fly can withstand more bites.
Tail: the beards of the rooster feather are red-orange in color (I use feathers from the scalp of a Whiting Coq De Leon rooster here, they are a little stiffer, glassy, shiny).
Thickening: black ostrich feather beard on hooks No. 6, peacock feather beard on hooks No. 8-10
Body: Uni Stretch in Doctor Blue, topped with translucent mother-of-pearl flat lurex UTC Mirage Opal Tinsel
Ribs: Oval silver lurex
Wing: Polar bear fur of blue color, 4-6 strips of thin flat flash Ice Wing Fiber color Blue Steelie (very rich blue-blue), winter Siberian squirrel fur (dark brown), 2 strips of thin twisted flash Midgeflash of black color.
Throat:
Cheeks: Jungle rooster
Head: Black mounting thread and transparent UV varnish of our own production

Salmon fly Red Butt Green Variant

This is a fairly universal front sight, all-weather, application has no specifics. It works well both for freshly entering fish and for picking up stopped ones.

Hook: Veniard Osprey, Partridge Patriot, Black Nickel hook color
Tip: Oval silver lurex
Rear: Red-orange mounting thread UTC 210den. It is much stronger than silk and the fly can withstand more bites.
Tail: Golden pheasant
Body: Peacock Uni Mylar
Ribs: Oval silver lurex
Wing: Winter Siberian squirrel fur (dark brown), 2 strips of thin twisted Midgeflash black.
Throat: Rooster feather is black (dyed black according to natural color, therefore with a blue-green tint)
Cheeks: Jungle rooster
Head: Black mounting thread and transparent UV varnish of our own production

Salmon fly Thunder&Lighting Variant

Quite a common and versatile option. Works well on all Kola rivers, both on the Tersky and Murmansk banks. All-weather, works in different lighting conditions and different shades of water.

Hook: Veniard Osprey, Partridge Patriot, Black Nickel hook color
Tip: Oval gold lurex
Rear: Poison green mounting thread UTC 210den. It is much stronger than silk and the fly can withstand more bites.
Tail: Golden pheasant
Body: Dabbing Ice Dub in Black Peacock
Ribs: Oval gold lurex
Body Feather: A small feather from the scalp of a rooster of fiery orange color
Wing:
Throat: Blue rooster feather
Cheeks: Jungle rooster
Head: Black mounting thread and transparent UV varnish of our own production

Salmon fly Baron

A contrasting fly, quite visible in the water, is good for fishing in light weather throughout the summer, but is more attractive for freshly entering fish. It works both on the Tersky and Murmansk coasts. Can work well for fall fish in early September before the waters rise from the rains.

Hook: Veniard Osprey, Partridge Patriot, Black Nickel hook color
Tip: Oval silver lurex
Rear: Red-orange mounting thread UTC 210den. It is much stronger than silk and the fly can withstand more bites.
Tail: the beards of the rooster feather are red-orange in color (I use feathers from the scalp of a Whiting Coq De Leon rooster here, they are a little stiffer, glassy, shiny).
Thickening: black ostrich feather beard on hooks No. 6, peacock feather beard on hooks No. 8-10
Body: The back third of the body is silver Ice Dub dubbing, the front two thirds of the body is Black Peacock Ice Dub dubbing.
Ribs: Oval silver lurex
Wing: Winter Siberian squirrel fur (dark brown) or relatively soft brown bear fur, dyed black (in the picture), 2 strips of thin twisted Midgeflash black.
Throat: Rooster feather is black (dyed black according to natural color, therefore with a blue-green tint)
Cheeks: Jungle rooster
Head: Black mounting thread and transparent UV varnish of our own production

Salmon fly OSA

Quite a contrasting fly, traditionally used by local fishermen on the North Shore of the Kola Peninsula during low water periods, good for fishing in light weather throughout the summer, and good at picking up both fresh and frozen fish from holes.

Hook: Veniard Osprey, Partridge Patriot, Black Nickel hook color
Tip: Oval red lurex
Tail: Winter Siberian squirrel fur (dark brown), 2 strips of thin twisted Midgeflash black.
Body: Uni Stretch Bright Yellow, spindle shaped.
Ribs: 2-3 peacock feather beards twisted with mounting thread
Wing: Winter Siberian squirrel fur (dark brown), two segments of drake feather
Throat: The rooster feather is dark brown in color with soft beards.
Cheeks: Jungle rooster
Head: Black mounting thread and transparent UV varnish of our own production

Salmon fly Ring

A very contrasting July fly, traditionally used by local fishermen on the North Shore of the Kola Peninsula during low water periods, good for fishing in light weather throughout the summer, and good at picking up both fresh and frozen fish from holes.

For low water, this option is crocheted on hooks No. 6, 8, 10 with a short shank. Since hooks from different manufacturers with the same number can have different dimensions, just in case I give the hook length in mm. The photo shows hook No. 6, 24 mm long.

Hook: Veniard Osprey, Partridge Patriot, Black Nickel hook color
Tip: Oval silver lurex
Body: Black, rather hard synthetic dubbing, in the middle of the body there are 4-5 turns of oval silver lurex turn to turn
Wing: Not too hard bear fur, dyed black, 2 strips of thin twisted Midgeflash black.
Throat:
Cheeks: Jungle rooster
Head: Black mounting thread and transparent UV varnish of our own production

Salmon fly Parrot-2

Quite a bright, noticeable fly, good for sunny weather, and also in a small size in July when the water is blooming. It works throughout the summer, but is more attractive for freshly arriving fish. It works both on the Tersky and Murmansk coasts. Can work well for fall fish in early September before the waters rise from the rains.

Hook: Veniard Osprey, Partridge Patriot, Black Nickel hook color
Tip: Oval red lurex
Body: Back half of body - Uni Stretch Bright Yellow, front half - Ice Dub dubbing in Black Peacock color
Ribs: Oval red lurex
Wing: Green squirrel fur, 2-3 strips of thin poison-green twisted flash Midgeflash, winter Siberian squirrel fur (dark brown)
Throat: Badger yellow chartreuse rooster feather (here I use a Whiting American Cape Budger rooster scalp feather, dyed without bleaching), for fly options with a bright orange head I always use this feather, it enhances the contrast.
Cheeks: Jungle rooster
Head: Orange mounting thread and fluorescent fiery orange UV varnish of our own production

Salmon fly WG Green Variant

Flies with a “Villigan-shaped” wing are traditionally catchy in all rivers of the Kola Peninsula without exception. A few years ago I experimented with a similar combination quite successfully, combining the blurred silhouette of a Willey Gunn (WG) style bucktail wing, which creates the illusion of movement, with the contrasting bright body elements typical of summer North Shore salmon flies. As a result, several color options were born, which I publish here. This fly is great for finding fish, its versatility gives you confidence when fishing in previously unknown areas. Basic option.

Hook: Veniard Osprey, Partridge Patriot, Black Nickel hook color
Tip: Oval silver lurex
Body: Back half of body is Bright Green dubbing, front half is Ice Dub dubbing in Black Peacock color
Ribs: Oval silver lurex
Wing:
Throat: Black rooster feather with soft beards
Cheeks: Jungle rooster
Head: Orange mounting thread and fluorescent fiery orange UV varnish of our own production

Salmon fly WG Silver Variant

Hook: Veniard Osprey, Partridge Patriot, Black Nickel hook color
Tip: Oval silver lurex
Body:
Ribs: Oval silver lurex
Wing: A mixture of fiery orange, yellow, black bucktail, 2-3 strips of thin poison-green twisted flash Midgeflash, 2 strips of thin synthetic Ice Wing fibers in Blue Steelie color (rich blue color), on top of the wing of a guinea fowl feather feather of a natural color.
Throat: Black rooster feather with soft beards
Cheeks: Jungle rooster
Head: Orange mounting thread and fluorescent fiery orange UV varnish of our own production

Salmon fly WG Black-Yellow Gold Variant

Hook: Veniard Osprey, Partridge Patriot, Black Nickel hook color
Tip: Oval gold lurex
Body: Back half of body - gold dubbing, front half - Ice Dub dubbing in Black Peacock color
Ribs: Oval gold lurex
Wing: Bucktail mix yellow and black, 2-3 strips of thin poison green twisted flash Midgeflash, 2 strips of thin synthetic Ice Wing fibers in Blue Steelie (rich blue color)
Throat: Black rooster feather with soft beards
Cheeks: Jungle rooster
Head: Orange mounting thread and fluorescent fiery orange UV varnish of our own production

Salmon fly WG Black-Chart Silver Variant

Hook: Veniard Osprey, Partridge Patriot, Black Nickel hook color
Tip: Oval silver lurex
Body: Back half of body is silver dubbing, front half is Ice Dub dubbing in Black Peacock color
Ribs: Oval silver lurex
Wing: A mixture of poisonous green and black bucktail, 2-3 strips of thin poisonous green twisted flash Midgeflash, 2 strips of thin synthetic Ice Wing fibers in Blue Steelie color (rich blue color), on top of the wing of a guinea fowl feather feather in poisonous green.
Throat: Black rooster feather with soft beards
Cheeks: Jungle rooster
Head: Orange mounting thread and fluorescent fiery orange UV varnish of our own production

To be continued...

It might be useful to read: