Map with distance between objects. Laying routes and calculating distances between cities on roads

Measure the corresponding segment using a ruler. It is preferable that it be made from sheet material that is as thin as possible. If the surface on which it is spread is not flat, a tailor's meter will help. And if you don’t have a thin ruler, and if you don’t mind piercing the card, it’s convenient to use a compass for measuring, preferably with two needles. Then you can transfer it to graph paper and measure the length of the segment along it.

Roads between two points are rarely straight. A convenient device - a curvimeter - will help you measure the length of the line. To use it, first rotate the roller to align the arrow with zero. If the curvimeter is electronic, it is not necessary to set it to zero manually - just press the reset button. Holding the roller, press it to the starting point of the segment so that the mark on the body (located above the roller) points directly to this point. Then move the roller along the line until the mark is aligned with the end point. Read the testimony. Please note that some curvimeters have two scales, one of which is graduated in centimeters, and the other in inches.

Find the scale indicator on the map - it is usually located in the lower right corner. Sometimes this indicator is a piece of calibrated length, next to which it is indicated what distance it corresponds to. Measure the length of this segment with a ruler. If it turns out, for example, that it has a length of 4 centimeters, and next to it it is indicated that it corresponds to 200 meters, divide the second number by the first, and you will find out that everyone on the map corresponds to 50 meters on the ground. On some, instead of a segment, there is a ready-made phrase, which may look, for example, as follows: “There are 150 meters in one centimeter.” The scale can also be specified as a ratio of the following form: 1:100000. In this case, we can calculate that a centimeter on the map corresponds to 1000 meters on the ground, since 100000/100 (centimeters in a meter) = 1000 m.

Multiply the distance measured with a ruler or curvimeter, expressed in centimeters, by the number of meters indicated on the map or calculated in one centimeter. The result will be the actual distance, expressed, respectively, in kilometers.

Any map is a miniature image of some territory. The coefficient showing how much the image is reduced in relation to the real object is called scale. Knowing it, you can determine distance By . For real paper-based maps, the scale is a fixed value. For virtual electronic cards this value changes as the magnification of the map image on the monitor screen changes.

Instructions

If yours is based, then find it, which is called a legend. Most often, it is framed. The legend must indicate the scale of the map, which will tell you, measured in distance according to this will be in reality, at . So, if the scale is 1:15000, then this means that 1 cm per map equal to 150 meters on the ground. If the map scale is 1:200000, then 1 cm laid out on it is equal to 2 km in reality

That distance, which interests you. Please note that if you want to determine how quickly you will walk or get from one house to another in or from one settlement to another, then your route will consist of straight segments. You will not move in a straight line, but along a route that runs along streets and roads.

On this page you can calculate the distance and route between two points (any city or town). The calculation is made using Yandex Maps. After entering the points, a route will appear on the map, laid out along highways.

For what purposes is this service?

First of all, such calculations are necessary for a car enthusiast to pre-plan a road trip or a business trip by car. By inserting fuel consumption and price per liter into the calculation table, you can estimate the potential costs when leaving.
A professional driver by occupation may also need to quickly calculate the optimal route along the highway when preparing for a future trip.

Features of route construction

This calculation function “Distance and route between two points” may be required to quickly and efficiently build a travel route taking into account possible traffic jams, or calculate the shortest distance between selected points.
It’s convenient to take a printed itinerary on your trip.

For a pre-designed path, click on the “Print Version” link to get a version adapted for printing. This map will schematically display the general route, where, if desired, for each intermediate settlement it will be possible to add an optimal detour diagram before printing.

For the selected route, you can calculate the approximate fuel consumption for your type of car by indicating the price per liter and the theoretical consumption l./100 km.

Instructions

Go to the Google search engine and click on the word “Maps”, which is located at the top of the search engine. On the right side you will see a map, and on the left there are two buttons: “Routes” and “My Places”. Click on "Routes". Two windows “A” and “B” will appear under it, that is, the starting and ending reference points. Let’s say you are in Ufa, and you need to find out how long the road to Perm will take. In this case, enter “Ufa” in box “A”, and “Perm” in box “B”. Click on the button again under the “Routes” windows. The route will appear on the map, and under the “A” and “B” windows, how many kilometers are from one city to another, as well as how much time it takes to get there by car. If you are interested walking, click on the button with the image of a pedestrian, which is located above windows “A” and “B”. The service will rebuild the route and automatically calculate distance and expected travel time.

In the event that it is necessary distance from point “A” to “B”, located in the same locality, you should proceed according to the above scheme. The only difference is that you need to add a street and, possibly, a house number separated by a comma to the name of the area. (For example, “A”: Moscow, Tverskaya 5 and “B”: Moscow, Tsvetnoy Boulevard, 3).

There are situations when you are interested distance between objects “directly”: through fields, forests and rivers. In this case, click on the cog icon in the top corner of the page. In the expanded menu that appears, select “Laboratory” Google Maps» and enable the distance measurement tool, save the changes. A ruler has appeared in the lower left corner of the map, click on it. Mark the starting point and then the end point. A red line will appear between these points on the map, and the distance will be shown in the panel on the left side.

Helpful advice

You can choose one of two units of measurement: kilometers or miles;
- by clicking on several points on the map, you can determine the distance between many points;
- if you log into the service using your profile, Google maps will remember your settings in the Google Maps Lab.

Sources:

measure distance on a map

Going into summer tourist trip on foot, by car or kayak, it is advisable to know in advance the distance that will need to be covered. To measure length paths, you can’t do without a map. But using a map it is easy to determine the direct distance between two objects. But what about, for example, measuring the length of a winding water route?

You will need

Area map, compass, strip of paper, curvimeter

Instructions

Technique one: using a compass. Set a compass angle suitable for measuring length, otherwise known as its pitch. The pitch will depend on how tortuous the line to be measured is. Typically, the pitch of the compass should not exceed one centimeter.

Place one leg of the compass at the starting point of the measured path length, and place the second needle in the direction of movement. Consistently turn the compass around each of the needles (it will resemble steps along the route). The length of the proposed path will be equal to the number of such “steps” multiplied by the steps of the compass, taking into account the scale of the map. The remainder, smaller than the pitch of the compass, can be measured linearly, that is, along a straight line.

The second method involves having a regular strip of paper. Place the strip of paper on its edge and align it with the route line. Where the line bends, bend the strip of paper accordingly. After that all that remains is to measure length the resulting segment of the path along the strip, of course, again taking into account the scale of the map. This method is only suitable for measuring the length of small sections of the path.

Autodispatcher.Ru

Get directions by car

This service allows you to quickly get a route between any cities

Russia and Abroad, and immediately see the route laid out on the map.

Why do you need a distance calculator?

Look at which cities will pass the route, you will be able to decide in advance on a place to stay for the night.

You will see the approximate fuel consumption for the entire trip and be able to estimate financial
expenses. You will know how long you will spend on the road.

How to get directions by car?

First you need to set the starting and ending points of the route. In the calculator

The calculation has two fields - “city from” and “city to”. Enter in the appropriate fields

Names of cities.

In the “fuel consumption” field, enter the corresponding characteristic of your car

(in liters per 100 kilometers). In the “fuel price” field - average price gasoline,
with which you fuel your car.

This data is needed to calculate the total fuel costs for the entire trip.

In the " additional settings distance calculation" you can also specify

Several conditions:

- “Bypassing countries” - do not lay a route through the territory of the specified countries.

The function is especially useful for international transport. Allows you not to stop by

To the territory of countries with visa regime and avoid customs inspections.

- “Detour of cities” - do not lay a route through the territory of the specified

Cities. If you do not want to pass through a certain city, enter its name in

This field.

- “Detour routes” - exclude the specified routes from the calculation.

- “Through cities” - the function allows you to navigate a route through a specific

City or cities, even if they lie outside the shortest path.

- “Speed on the road” - there are 4 types of roads - territorial,

Regional, highway, motorway. You can exclude one from the calculation

Or several types.

You can plot a route by car in one of two modes:

The shortest route is the minimum distance from one city to another;

The fastest route is minimum time on the way (only taken into account

Expressways).

After you have set all the conditions, click the “calculate” button.

On the map that appears, the route will be marked with a thick red line, and all cities along the route will be marked with red markers.

The calculation results are presented in the form of a table, which shows the length of the entire path, the time in

trip, total fuel consumption and the amount this fuel will cost.

The table also contains a list of all cities through which the route is laid, with

Division into regions and countries.

The results obtained can be printed on a printer and taken with you on the road instead

Atlas. If you have the ability to access the Internet in your car (for example, through

satellite or cellular network), you can check the route and correct it in

Depends on the circumstances.

Please remember that the calculations use average data. That's why

The results obtained are only indicative values and not exact figures.

The form allows you to calculate distances and plot the optimal route (broken down into sections) between cities online. In addition, you can calculate the estimated fuel consumption required to travel from point A to point B, and its cost.

If there is such a need, then as additional conditions you can set which cities you definitely want to travel through or, conversely, which cities and countries you absolutely do not want to visit.

Online routing

Fill out the fields of the form, click the “CALCULATE” button and after that a route map with a list of sections of the route will appear on the screen, which, if desired, can be printed on a separate sheet of paper and taken with you on the road:

How to correctly calculate a route by car between cities

Traveling in your own car not only brings unforgettable impressions, but also provides complete freedom of choice. You can pick one optimal route, which will be convenient and comfortable, and will allow you to enjoy all the charm of the sights and surrounding landscape, in those places that you have selected yourself.

So that the trip is not overshadowed by various unpleasant situations, such as wandering in search of the right road, or a complete misunderstanding of where fate has taken you on four wheels, you need to not only correctly calculate the route, but also have a clear idea of it.

Selecting a route planning tool online

Not every motorist has a navigator at his disposal, and even if he does, not all devices can calculate the route by car in full, providing the car driver with only general data about what the route from point A to point B will be.

But there is a much better option; a modern service provides drivers with the opportunity to calculate the route themselves without spending a lot of time on it. Using the form at the beginning of the article, you can calculate the route between cities Russian Federation, CIS countries and Europe online.

What data can you get? by filling out the form to get the desired route:

Full calculation of the distance between cities.
When calculating, the entire path will be divided into certain sections.
Additionally, you can calculate the route by car and fuel consumption for moving from point A to point B.
Calculating fuel consumption is a very useful function - as a result, you can get the total estimated cost of gasoline so that you have an idea of how much to expect.
It is possible to exclude from the route those cities and sections of roads that you do not want to pass or visit; and add those cities through which travel is required or desirable.
By analogy, you can also exclude or add different countries.

In addition, the entire calculated route between cities can be printed out on a printer so that you have a map in front of your eyes and follow it exactly without deviating from the path.

Detailed route calculation

First you need to enter the city from which you are planning to depart, then your final destination. Between the columns there is a small dot - “via”, by clicking on it you can enter the cities and countries that you want to visit. It is also worth noting the type of vehicle (truck or passenger car) - the correct calculation of fuel consumption, speed, and therefore the time that will be spent on the road depends on this.

In the first column with the gas station icon, you need to note the number of liters that the car “eats” per hundred kilometers, and in the second column - the approximate price per liter of fuel.

It is advisable to mark the points “ferries” and “dirt roads” if they are present along the route, since the correct calculation of the length and time of the route also depends on this.

After pressing the “calculate” button, the future traveler will be presented with the exact route that must be covered before final destination, its exact distance, the estimated number of liters that will be spent and the total cost of gasoline.

After the map appears, you can check off those points that need to be detoured, if necessary. By clicking on the “bypass marked countries and cities” button, the motorist will get absolutely new route, which will bypass those settlements that have been marked. Then the mileage, fuel consumption and cost will change. By selecting the right option, you can click on the printer icon and print a map with the route.

Features of route calculation

The calculation carried out in this form will allow you to calculate the route according to several criteria. This could be the route:

Fast– runs with an optimal reduction in the time allotted for the journey.
Short– laid along the minimum distance from point A to point B.
Economy– the calculation is made with minimal fuel consumption.

After the system calculates the route, all three types of path will be displayed on the map, if this is possible, if not, then the path indicated on the map will be the fastest, shortest and most economical. It is worth adding that in the new version of the calculation it is possible only for the CIS countries, Turkey and several European countries. The route laid outside these countries will be carried out according to old calculations.

Also in each table-map you can see the distance between cities or towns, including designated road intersection points. In addition, by hovering the cursor over the road designation, you can find out the route number, its name, and the permissible maximum speed, and the arrows in front of the city name will tell you which way the path will go.

By using this online route calculation form, every motorist will be spared the trouble of studying a road atlas, will never get lost on the road, and all passengers and the driver will become participants in an exciting journey.

Now you understand that before going to, you should calculate the route between cities in advance, taking into account your wishes.

The same applies to those car owners who want to find out how to drive a car from Moscow to Minsk, which we have already talked about.

Video: in addition to a well-designed route, the car itself must also be prepared for long trips:

May be of interest:

Scanner for self-diagnosis of a car

How to quickly get rid of scratches on a car body

Selection of useful accessories for car owners

Compare auto products by price and quality >>>

Similar articles

Comments on the article:

Olga

Once a year we travel from Barnaul to Rudny, Kustanai region. I calculated the route according to the service. It turns out we are driving fast. It differs from the short one by 4 km - the directions are completely different. We used the short one once - I didn’t like driving mainly through Kazakhstan.
The service calculated routes more accurately than the navigator. He showed all the sections very competently, including the transit route through Novosibirsk. We have two navigators - both make mistakes when calculating routes in the Asian part of the country. I will definitely check the service when I travel to the Tomsk region. And I will use it - both gas mileage and travel time - no other navigator does this.

Vadim

The calculation is not always correct. So from Nyagan to Yekaterinburg he plans to go through Unyugan to Sovetsky, but there is no road there (not built). Thus, it underestimates the distance by about 150-180 km.

Irina

I’ve been using this service for a long time, I’ve been traveling around Europe for many years, and the route has always helped me out. There are all points here, even small towns. However, today I unexpectedly began to answer that there are no roads between, say, Barcelona and Montpellier. I did not find anything on my route along the coast from Spain through France to Italy. And this is in Europe, where every village has a road! Please check, otherwise it’s a pity to part with you, you have always been on top. Thank you in advance.

Kirill

I have used this service once so far. I went to Dombay from Moscow. The route was laid out well, it did not lead through the forests. Fuel consumption was almost accurate.

Alexander

The service is very useful, but in addition to it, when laying out and calculating the route, I also recommend carefully looking at the map.
The main disadvantage of the service is that it builds a “standard” route and does not take into account local and regional roads, and especially roads under construction.
And you can also drive along them and, if you travel, it will bring a lot of impressions.

Olga

In the summer we are planning a road trip from Nizhny Novgorod to St. Petersburg, via Yaroslavl: the program has already compiled 3 route options - I’ll probably leave the page in my bookmarks.

Andrey Anatolyevich

And Crimea is covered by this program. We are going on holiday by car this summer, it would be very useful.

Igor V.

What I liked most was the ability to print, which a regular navigator does not allow. At short distances this is not so relevant, but at long trips will come in handy.

Hope

We have been traveling to Europe only by car for two years in a row. I usually plan a route and calculate the approximate gas mileage. If I had known about this program earlier, it would have been much easier.

Tonya

A very convenient and useful tool. We were planning to go on a trip, but we thought we couldn’t afford it. We looked at the distance and calculated the gas - in the end the trip took place!

Igor Nikolaevich

Is there any feedback from map developers? The point is that you often run into blocked sections of roads that navigators don’t know about. But how can you report them so that amendments can be made?

Alexei

Leonid

There is one problem here, relevance to this moment. After all, all these services are updated by ordinary people. Yes, with big roads Troubles usually do not arise, but with minor ones, somewhere there is a repair going on, somewhere there is an accident. And that’s it, when you arrive, you are directed to take a detour. And all your savings on fuel and time are reduced to nothing.

Artyom Kovalev

Lera

My driving experience is not long, so I use all possible modern means. I used this service when traveling to Moscow. But in the Belgorod area the map did not match at all. And the navigator showed that I was driving in an open field. Apparently, changes have not yet been made to the programs.

Ekaterina932

When traveling by car for the first time to visit relatives, it was decided to use a standard navigator, the distance was approximately 700 km, how many nerves were spent on the “killed” road without settlements and lanterns, the journey ended up taking more than 13 hours. On the way back we figured everything out and knew where the gas station was, where to eat and not worry about breakdowns, calmly without stress and much less time and 50 km of savings.

Tatiana

I think this service is simply necessary for those who love to travel! Previously, I only used a navigator and, to be honest, I drove around the expanses of our beautiful country! And I estimated the travel time by eye. But I think, to be sure, it’s better to use several options for help, and you shouldn’t ignore road signs! Before Christmas, I was driving from Minsk to St. Petersburg, there was a snowstorm, the signs were completely covered with snow, and this is where the online service came in VERY useful! There were no problems with the location or speed limit!

Alexander Petrovich

I use programs, but only as an additional source of information. If I have a long trip ahead, I look at the route on the map. To have a general idea in advance of what you will have to face.

Peter

Sorry, I don’t believe in the effectiveness of such resources. For six years I traveled from the city of Orsk to the city of Nadym in my car. It turns out almost three thousand, depending on how you go. So the bridge over the Nadym River has been marked on maps and all Internet services since 2008, and the working span was opened in the past, the commissioning of the bridge is now. In fact, it is a pontoon crossing that is closed every now and then. You are welcome to the ramp. Will the service take this into account? How many dirt roads do we have that are designated as “hard surface” roads? How much of the asphalt lies on top of the rubble? And there’s no point in talking about speed limits at all; signs wander around the highways once a month, either for road work or something else. So, when getting ready to go on a trip, talk to those who have traveled along it, and still be prepared for surprises. By the way, I traveled for six years and only on my last trip, I succumbed to the persuasion of friends to make a detour of three hundred kilometers in order to bypass the completely destroyed Salym-Uvat section. I went through the Khanty, Lord, these are the kind of roads there should be in Russia. Oncoming traffic is separated, three lanes in one direction. The hook is decent, but it’s less tired and the car is intact. So I don’t believe it.

Dmitriy

I believe that the cards have not yet been brought to perfect condition. There are no people who monitor the condition of roads at the moment, so relying on old data is simply not realistic.

Olga

When we went to Abkhazia for the first time, we had no idea how best to get there, since the path was not close anyway. With the help of such applications, we quickly paved a route for ourselves, and with maximum accuracy.

Anna

We are planning to head south by car. Now it’s not a problem not only to “plot” the route, but also to calculate the required amount of fuel and save on its consumption)

Pasha

Although now phones with navigators, and such search engines as Gul and Yandex offer their own routers. But you need to plan your route separately and have a map with checkpoints on hand, just in case there is no Internet or your phone dies.

Sasha

Well, such a journey does not make sense at all when everything is calculated and everything should work out by itself. It is much more interesting to drive when you have neither a map nor a navigator. Language will take you to Kyiv, friends. So good luck)

Michael

Such programs are certainly useful and help determine the distance between settlements. However, exact time arrival is impossible to predict, because everything depends on specific road conditions

Gennady

Nowadays it is very convenient to estimate the route of your future road trip; they will calculate for you down to a kilometer and a liter of gasoline, but this is far from the truth. First of all, I go to the sites of auto travelers and read reports with instructions on real trips, with numbers, with rubles, the cost of parking, overnight stays! Then you can paint the full picture, especially when it comes to traveling abroad. And then I post my full story on the Internet!

Oleg

Previously, I also used similar sites, pre-calculating the route and approximate fuel consumption on a laptop. But then, I liked the app on my smartphone better; it’s always at hand and in front of my eyes while traveling. At first I used the Navitel program, it allows, firstly, to determine and select a route acceptable to me, and secondly, it warns me about the congestion of the route. But after it took me completely to the wrong place, I switched to Yandex navigator. I’ve been using it for several years and it’s very convenient - I indicate the arrival point and immediately you have several routes, travel time, traffic congestion. And you don’t have to type anything manually, all commands are done by voice.

Nikolay

I usually look up the route on the Internet in mapping services. I don’t have a navigator, I rarely go to unfamiliar places. Whatever one may say, the trip always turns out to be longer than the planned route. Perhaps specialized programs do this more accurately, but for me this is a trifle. The main thing is to get to the right place, and sometimes you choose a longer route, but along a normal road. The shortest path will not always take you faster. If I'm going to unfamiliar city, I’m looking through which streets are best to get there. There was a program on my smartphone, but I was so used to using it that I was distracted by every sound. So I travel almost the old fashioned way, using an electronic map :)

Sergey

How to calculate a route on broken roads where repair work is underway or weather, which make it difficult to travel, and there is no detour for normal movement. Also, under such conditions, fuel consumption increases significantly. On rare occasions, something of force majeure enters the database for quick response and reporting.

Ivanovich

About 15 years ago, in my car, with my family, we went to Rostov for the first time through the town of Rossosh, Voronezh region. We looked at the road atlas, from which we realized that it would be shorter if we took a route that passed not along the city bypass road, but through the city along its main street. As a result of this decision, already far beyond the city in the steppe, the asphalt suddenly ran out, and we barely, barely, through country roads and gullies, got onto the Rostov highway, a little further than the town of Boguchar. It was sad to go. After that, I always try to plan my route ahead of time. A website with the ability to plot a route, calculating its duration in time and distance, as well as the amount of fuel required, is a very necessary tool for drivers.

Basil

I often travel by car. I found out for myself that you can’t rely on just one thing. Yes, now there are already phones with maps and navigators, but when I plan a route, I still use similar sites and make a selection in Word useful information on 5-6 sheets (hotel numbers, addresses, some places, etc.), I print it out and take it with me. Helped me out more than once. Electronics can break, but paper is always with me.

Sasha

I travel long distances quite often. I definitely use a similar program that I found on the Internet 5-6 years ago to plan a new route - you need to know the approximate fuel consumption and the optimal route.

Lyokha

The first time I used online trip planning was in 2015 - I was traveling with my family to the sea, a distance of 1100 km. Surprisingly, at all the key points I was in accordance with the plan, the difference was no more than 10 minutes. Now I have a navigator, but I still usually figure out the route using GIS. And just to be on the safe side, I drive a 1986 car atlas. Believe it or not, but a couple of times controversial situations arose when it was the old Soviet atlas that came to the rescue.

Paul

Particularly pleasing in navigation programs are city street directions. The highway is just that: a highway, where can you turn off it, onto an unfamiliar country road? and here, passing Big City, you can get lost and wind around for a long time, this is where navigation comes to the rescue! Drives carefully, indicating turns, junctions, and intersections in advance. This is how I was able to get out of the nightmare Volgograd on the way to the Black Sea!

Denis

Oh, I remember the 90s, when the atlas served as a navigator highways» 78 year of manufacture. You took a wrong turn, stopped, took out the atlas on the hood and caught local resident to show the way! It was a fun time!

Igor

Nowadays, it has become very easy to determine the distance of your route. I used to specifically calculate the route before, when I went to Kirov for hunting and fishing, but then there was a problem with gasoline, so I calculated how much to take with me. Last years I used the Navitel navigator, then after it took me to the wrong place, I replaced it with a Yandex navigator. Conveniently displays the distance to an object simultaneously with several routes, choose any one.

Konstantin

Route planning, especially for long trips necessary thing. Firstly, you receive information about the travel time, at least approximately, and the distance. Based on this, you know the approximate fuel consumption, which means financial losses. But all this is quite easy to figure out without using the Internet, a map or atlas is enough. But it’s difficult to arrive in cities without a navigator, if the city is still unfamiliar. This is where I always use the navigator on my smartphone, it’s very informative and convenient.

Michael

This summer I had to travel from Volgograd to Moscow (almost 1000 km). Thanks to this online service I calculated everything in advance (fuel consumption, travel time). I didn’t expect it, but that’s roughly what happened. Very convenient, I recommend it.

It might be useful to read: