Fishing gadgets. DIY or DIY fishing gear. Spinner for pike perch from broken tweezers

An oscillating spoon is well suited for summer fishing - it is a metal plate, which, thanks to its design, can make movements in a certain rhythm, which attracts fish.

A rotating spoon is no less effective - during the retrieve, the rod begins to rotate, attracting fish with its movements. There are also acoustic spoons - they are very effective because fish are sensitive to sounds.

The simplest ones are simply made from two plates, which create a ringing sound when they touch. The Devon spinner, in turn, imitates a fast fish. Its only serious drawback is that it constantly twists the line. Non-snagging spinners are also known - they are used mainly to avoid snagging.

You can also make a spinner yourself - there is nothing complicated about it, and the result is many times superior to mass stamping. It’s not for nothing that most professional fishermen make their own lures. First you need to choose a material - any metal will do.

Although it is better to avoid aluminum - it plays very poorly. The plate must be free of nicks, rust, etc. - thickness from half a millimeter to eight tenths. A large spinner can reach one and a half millimeters. After cutting out the shape, the plate is sanded and leveled.

After testing for play and catch, the spinners are manufactured according to this option. Before use, it would be a good idea to sand the metal with felt or felt - you can use blade mastic or crocus as a lubricant.

Feeders

Fish feeders have been made for many years - with the development of technology, more and more new types are appearing, and they are constantly being improved. The advantage of feeders is that you can throw them quite far, thus counting on big fish, as well as a good result and no snagging.

Today, feeder feeders and carp feeders are made - the former are much more universal, and the latter are used mainly for carp, since they are larger.

You can also divide feeders into types according to shape - square, oval, spring, etc. The choice is wide - the main thing is to decide in advance where the feeders will be used.

In addition, they are made open and closed - the latter are suitable for animal feed, and the former for vegetable and cereals.

The materials used to make feeders are different - plastic is cheaper, but it is short-lived, but metal will last longer, especially if it is coated with an anti-corrosion compound, although such feeders are not cheap.

You can make a feeder yourself - also from plastic or metal. The first can be made from a plastic bottle - the neck and bottom are cut off from it, and the cylinder is cut across. The plastic sheet should be about 6 by 12-13 cm in size. The hole points are marked on the plastic sheet, at a distance of about two centimeters.

The cylinder is closed with an overlap and fastened with paper clips. Afterwards, the holes themselves are burned out - they can also be punched with a hole punch or drilled. When the base is ready, you need to cover the joint with a lead strip and put a fastening unit on one end - after this the plate is compressed at both ends.

A metal feeder is more difficult to make and requires a lot of materials and tools.

Floats

Floats have been used for a long time, since they are the ones that signal when a fish is biting. Today, goose feathers have been replaced by modern, high-tech models, but their essence has remained unchanged. For fly fishing rods, light floats with a small weight are used - they allow you to notice even the slightest movement.

For match and Bolognese fishing rods, “wagglers” are usually used. For deep fishing, you need a float with a blind mount, and if the depth exceeds the length of the fishing rod, then the mount must be sliding. During plug fishing, ultra-sensitive, carp and flat floats are used.

To make a float at home, you need to have some equipment and materials. It is best to make floats in several pieces - it just saves time.

So, one float shape can be made in different sizes. You need to make a blank with a jigsaw or knife.

It is best to leave a length margin of a centimeter or one and a half, and a thickness of 3-4 mm.

To find the center, draw diagonals at the ends. For the keel, steel wire is used, which must be tinned.

In the center at the end you need to insert the keel a centimeter, maybe one and a half.

After checking, dip the keel in epoxy glue and put it back in place. When everything is dry, the workpiece is shaped into a float - the edges of the main cylinder are cut off, and a smaller cylinder is made on the side opposite the keel.

Next, the workpiece is given its final shape, followed by grinding. A float ring is made from thin wire, leaving 5-7 mm ends. An antenna 3-5 cm in size is made from the same wire from which the keel was made and glued in place of the cut thin cylinder. The ring is glued just below the top of the float.

Afterwards, you just need to paint the float - for greater brightness of the antenna, you can use wire casings (preferably white). The paints should be waterproof, and they should not be applied in a very thick layer. It will take a day or two for the float to dry.

Mugs

Fishing mugs are used for catching predatory fish - they are made from a disk, a stick and equipment, which, in turn, consists of a line, a weight and a leash (for pike), as well as a tee.

Since we do not produce high-quality mugs, it is best to use homemade mugs. To make such a device, you first need to cut out a shape from foam plastic and sand it with sandpaper. In the center of the workpiece you need to drill a hole one and a half centimeters in diameter, into which a sleeve with its own hole, but already 8-9 mm, is inserted.

The bottom side of the disk should be painted white, and the top side red. The mast should be made of coniferous wood in the form of a truncated cone.

It will be fifteen centimeters long, with a diameter of 6 to 12 mm from top to butt.

Since coniferous trees are quite soft, no equipment is needed - just a simple knife.

The keel head is more difficult - you need a lathe here, since its shape should be like that of an egg.

If all the work is done on a machine, then the mast will generally be smooth and even.

A blind hole is made in the keel head, which is necessary to insert the mast head there - for good fastening, it is filled with epoxy resin. The last thing left is to equip the circle.

It is better to make the main line from a nylon cord with a cross-section of half a millimeter. The length is determined individually - several meters longer than the deep place at the intended fishing spot.

Fishing rods

An ordinary fishing rod consists of several parts - the rod itself, the float, fishing line, hook, sinker, reel and leader. The fishing rod is made of wood - you can use hazel or birch, use a pebble as a sinker, and a feather or cork as a float. Naturally, such a primitive fishing rod will not catch many fish.

It is much more difficult to make a spinning rod yourself, but it is generally a professional device for fishing. The fishing rod here is made of cork or wood, but plastic can also be used.

In addition, you definitely need a reel - long distance is important for spinning, and without a reel you won’t be able to pull the fish out of there. The fishing line is attached along the entire length of the rod, and is released behind it - a bait for predatory fish species is suspended at the end.

Snaps

Today there are many baits, and even more types of equipment.

The classic equipment is a weight-head and a hook soldered into it. The weight can be of different shapes - a ball or an ellipse, a rugby or a hoof.

It is not difficult to make such a bait at home, although it will require some skill and special equipment - you need to grind out a weight and solder a small ring and a hook to it. Actually, this is all that is needed to make classic equipment.

Hinged mounting means that there are two fastenings on the weight - one for the main line and hook, and the other for the offset hook and bait.

Making this is only a little more difficult than classic equipment - you just need to solder an additional fastener.

Nods

For summer fishing, side nods are best suited. They are not made at all factories, and therefore they are available mainly in large cities - for other settlements only hand-made production is suitable.

First, you need to cut a thin sliver from the knee of the telescopic rod - the length should be at least 15 cm. The sliver must be cleaned and sanded with sandpaper.

Afterwards, a ring is made from the wire with one end several centimeters in length - the end should extend from the ring at a right angle.

In addition, you can put a heat tube on the nod and melt it - this way there is no need to paint it, and also test for flexibility.

How to catch more fish?

I've been doing it for quite some time now active fishing and found many ways to improve the bite. And here are the most effective:

. Attracts fish in cold and warm water with the help of pheromones included in the composition and stimulates its appetite. It’s a pity that Rosprirodnadzor wants to impose a ban on its sale.
More sensitive gear. Reviews and instructions for other types of gear can be found on the pages of my website.
Lures using pheromones.

Other secrets successful fishing you can get it for free by reading my other materials on the site.

Homemade boats

The boat is well suited for relaxing fishing, but not everyone can afford to buy such a device - but there is a way out. You can make a boat with your own hands. It is best to make such a boat from wood - this way you can even make it large enough for two.

The materials you will need are ash and five-millimeter plywood. First you need to make the frames and keel.

The latter is best made from one board, but you can glue two together, although this will make the boat not so strong. The frames are wedged in the grooves of the keel, and the bottom of the boat is fitted to them.

The assembly of the frame ends with the fastening of two more slats - not screws to the right and left of the longitudinal one.

The next stage involves turning the boat over on the trestles. The frames are processed with a rasp so that they fit snugly against the curved rail being pressed.

The skin pieces are cut out of plywood and attached to the boat using a generous amount of epoxy glue.

In addition, fairly large clamps also facilitate fastening. Each component must be planed so that the next one fits as tightly as possible - any remaining glue that is not used for fastening must be removed with a linen rag soaked in acetone.

Afterwards, the fastening of the remaining parts begins - the upper strips, the rear part of the boat, fenders, seat supports, breshtuk, brackets, etc.

Fishing knots

Many types are used in the fishing process fishing knots– and they are all divided into categories according to their intended purpose. For example, there are knots for hooks and lures, loops, for attaching fishing line to a reel and for tying fishing lines.

For a spatula hook that does not have a knot, a basic fisherman's knot is usually used. For large hooks, use the Dumhof knot. The leash knot is convenient because it does not damage the fishing line.

Many fishermen also use stopper knots to limit the depth of a sliding cast or to control casting distance.

Homemade sprays for summer fishing

The simplest recipe for the spray is vanilla and water. Add vanilla powder or liquid to hot water, and then pour it into a spray bottle. Fruit sprays use fruit essences as a base - they have a very rich aroma.

You can also combine different scents - for example, by mixing strawberry essence, vanilla and cocoa in water, you need to bring the container to a boil, and then pour it into bottles.

When fishing, it is best to take several types of sprays - who knows what kind of fish will go today? For crucian carp, for example, it is best to use sunflower oil and garlic.

To briefly summarize all of the above, we can say that summer fishing is quite troublesome, but nevertheless brings joy and pleasure. Moreover, almost everything you need can be prepared with your own hands without much difficulty.

How long has it been since you had a really BIG CATCH?

When was the last time you caught dozens of HUGE pike/carp/bream?

We always want to get results from fishing - to catch not three perch, but ten kilogram pikes - what a catch! Each of us dreams of this, but not everyone can do it.

A good catch can be achieved (and we know this) thanks to good bait.

It can be prepared at home or bought in fishing stores. But stores are expensive, and to prepare bait at home, you need to spend a lot of time, and, to be fair, homemade bait does not always work well.

You know that disappointment when you buy bait or prepare it at home and only catch three or four bass?

So maybe it’s time to use a truly working product, the effectiveness of which has been proven both scientifically and in practice on the rivers and ponds of Russia?

It gives the same result that we cannot achieve on our own, especially since it is cheap, which distinguishes it from other means and there is no need to spend time on production - you order it, it’s delivered and you’re good to go!

Of course, it is better to try once than to hear a thousand times. Moreover, now is the season! This is a great bonus when ordering!

Find out more about the bait!

Fishing has long ceased to be a simple entertainment and hobby; for many men it is a time when they can relax, take a break from problems and focus on complex, but interesting process and homemade fishing crafts for summer fishing will help with this. Therefore, there are a great many ways to fish, as well as varieties of fishing tackle, everyone selects them to suit their own needs, and some even create several home-made fishing products for summer fishing. This could be a simple hand-made wooden stick with fishing line and worms, or a high-tech novelty, complemented by your own spinners and modern baits for predatory fish.

Types of homemade products
Spoon
Float

And it doesn’t matter how you prefer to fish: the old fashioned way or using modern gadgets - a homemade fishing device for summer fishing will help you adjust a ready-made device to your requirements. Since ancient times, fishermen had to make everything themselves, and even in the modern world, many experienced people prefer to rely on equipment they created themselves, which will never fail, unlike purchased ones.

This practice is common because factory production is set up to create crafts that will suit as many situations as possible, and with rare exceptions they do not take into account many details.

So, what can you do yourself to make summer fishing easier if you are new to this activity?
No matter how developed your imagination is and no matter how varied your DIY fishing gear may look, they can still be classified into one of 8 main types:

a spoon is one of the most necessary things when fishing on a river;
feeder - helps you not to bother with additional feeding;
A float is the main gear that will help you understand whether the fish has eaten the bait along with the hook. Some experienced fishermen prefer to get rid of floats and follow the movement of the line, but this requires many years of training and not everyone can master this style;
mugs or otherwise called zherlitsy;
fishing rods are the main component, and with proper skill you can make your own fishing rod. They also have many varieties;
equipment - various additions to the fishing rod that simplify fishing and change it to suit the needs of the environment;
nods - help to more accurately recognize the catch;
homemade boats - their creation requires experience in woodworking and carpentry, but they can also be made from polymers.

With rare exceptions, almost all fishing homemade products fall under this type, and if you miss fishing rods and boats that are difficult to implement, then you can make most of the other gear yourself.

A very common and indispensable equipment when hunting predatory fish:

Thanks to vibrations due to the flow of the river or the movement of the fishing rod, it allows you to imitate fish or other small animals.

2. Easy to manufacture and use.

It is most convenient to use them in conjunction with a spinning rod, and these are the simplest fishing homemade products that anyone can do. In order to make homemade spinners, it is enough to make “petals”, which are cut out of metal according to pre-marked templates. After that, several holes are drilled in such a part, and it itself is bent at a right angle so that the first and second holes are on the same straight line. Next, this entire structure is secured to the main fishing line in a simple way.
You can experiment with templates from the Internet or create your own, but to make the work easier, it is better to use ductile metals that are not subject to rapid oxidation.

Float

It is impossible to imagine modern fishing without a float; it has become a kind of symbol of fishing and is displayed on signs in specialized stores.

Most beginners think that this gear has a couple of trivial functions:

hook support at a given depth;
bite signal.

In reality, everything is completely different, and, depending on modifications, this simple equipment can perform dozens of different functions. If we talk about the design, then it is a simple “stick” attached to a fishing line, the lower part of which is in the water, and the upper part is above it and should record the movements of the hook. This base can be supplemented in a variety of ways, as evidenced by the many varieties of floats, and each fits its own individual situation, performing certain tasks.

Creating a float at home is accessible to anyone, because its main characteristic is that its density is lower than that of water. Therefore, for the base, you can use any container with air that will allow the homemade product to float, so that it does not turn over from side to side, you need to install a keel or weight on one side, in simple terms. Attach a signal antenna on top, which should be drawn out in advance. Next, all that remains is to find a metal ring or elastic band that will allow you to attach it all to the fishing line and your homemade float is ready!

Many lovers fishing They devote all their free time to fishing. At the same time, fishermen who are in love with their occupation are engaged in the manufacture of fishing equipment, such as baits, tackles, etc.

During the fishing process, some silicone baits lose part of their bodies, and it is a pity to throw them away after that. If you collect several processed silicones, you can use them to make new working baits.

Manufacturing technology

In the prepared container, gypsum is diluted to the state of thick sour cream. After this, old vibrotails or twisters are dipped into the solution to obtain templates; after the plaster has hardened, the baits are removed very carefully so as not to damage the mold. If there are any irregularities, they are smoothed out with a sharp, thin object.
The mold prepared in this way is thoroughly greased. The most suitable option is sunflower oil. This is necessary so that the finished product does not stick to the mold during the manufacturing process.
All mold filling operations must be performed outdoors or in a well-ventilated area.
Old, used silicone products are crushed into pieces and placed in a bowl that is heated on the stove. To prevent the silicone from burning, it must be stirred regularly, and the fire should be at a distance of 15-20 cm from the container with silicone. If you add dyes to silicone, you can get bait of the desired color, and if you add flavoring, it will become edible silicone.
The well-heated and thoroughly mixed mass is poured into the mold. If you plan to get a two-color bait, then each new layer is poured after the first layer has dried.
After about 15-20 minutes, when the silicone has cooled, the finished bait is removed from the mold, the mold is cleaned, greased with sunflower oil and the process is repeated.

Mini clasp for changing the nozzle with your own hands

Almost always, when fishing, it is necessary to quickly and efficiently change the bait or modify the equipment by changing the leash or feeder. For these purposes, there is a fastener design, quite small size. Making it at home will not be difficult.

Manufacturing technology

The following tool is required:
- wire cutters;
- round-nosed pliers;
- tweezers.
The basis of the material can be a large stapler from a stapler.
The wire is bent with pliers into a shape similar in appearance to a paper clip, but smaller in size.
Excess ends are cut off with wire cutters.
A cambric of the appropriate size is selected so that it fits freely on the fastener.
The size of the cambric should be slightly larger than the fastener, so the excess is cut off.
A piece of cambric is put on a fishing line and secured with a knot.
Any bait is attached to the other end of the mini-fastener, after which, with effort, the cambric is pulled.
Mini clasp, ready to use.

Feeder for feeding fish from a boat

For those who regularly fish from a boat, it will be useful to have a simple but effective feeder. It will come in handy if you have to fish on a river where there is a current. To do this you will need the following elements:

a piece of plastic sewer pipe;
two fasteners;
lead;
electric drill;
rope, rivets;
loop and lock.

A piece of pipe up to 30 cm long is taken and plugs are installed on both sides. One of them is installed solidly, and the other is installed in such a way that it can be easily removed. After this, holes are drilled over the entire surface. A rope is attached to the plug that opens. To prevent the plug from opening on its own, a lock or latch of any design is installed.

On the reverse side, where the plug is rigidly fixed, weights should be secured.

The feeder is lowered to the bottom on a rope and remains there until the end of fishing. Thanks to the drilled holes, the bait is slowly washed out of the feeder, which allows you to keep the fish at the fishing point.

DIY wobbler

Every spinner wants to have a good, catchy wobbler, but not everyone can afford to buy one. As a rule, wobblers are expensive baits, especially if they are related to well-known manufacturers.

In this regard, some fishermen have mastered, and very successfully, making wobblers at home. This is very interesting and exciting process, which does not require special equipment and tools.

How to make a wobbler

To begin with, you should decide on the shape and color of the future bait. To do this, you will have to take up art and draw a sketch of the future wobbler on paper. Regardless of the material of manufacture, the wobbler is made of 2 symmetrical parts. There should be a reinforcing wire running inside them.
Foam can also be used as a material for manufacturing, but it is not as durable as wood or plastic. Therefore, having taken the necessary material, they are engaged in the manufacture of blanks.
Fastenings for rings and tee hooks are prepared from thin stainless steel. The fasteners are mounted in specially cut out places located on the body of the 2 halves of the bait. the two halves are connected using glue. After the glue has dried, a cut is formed for the front blade, after which it is rigidly attached using the same glue.
After this, the wobbler should be adjusted based on personal preferences.
Any depressions or voids left on the bait are filled with epoxy resin, after which the bait is sanded and prepared for painting. Painting is also carried out depending on your own imagination.

DIY spinner

It’s not at all difficult to make a rotating spoon yourself, if you have at least some skills in working with tools and materials. To make it you will need:

regular paper clip;
tee (hook);
metal plate, 0.5-1 mm thick;
not a big bead;
a piece of sheet lead;
tools: file, pliers, needle files, scissors.

First, on a piece of cardboard you need to draw the shape of a petal for the future bait, after which the drawing is transferred to the metal. Take scissors and carefully cut out a petal from a piece of metal. After this, the cut petal is processed with a file so that there are no burrs. Two holes are drilled along the edges of the petal (one on each edge) and processed with needle files. The places where the holes are drilled must be bent 90 degrees in relation to the petal. Then you need to take the wire and straighten it, and at one of its ends you need to form a loop and secure the tee.

After this, a petal and a bead are put on the same wire, after which a loop is again formed at the end of the wire to attach the fishing line. Moreover, the loop must be made so that it does not interfere with the free rotation of the petal.

The spinner requires adjustment through additional loading. A lead weight is placed between the tee and the petal. Again, everything needs to be calculated correctly so that the load does not interfere with the rotation of the petal. The last stage is painting the petal.

Live bait trap

Arriving for fishing, you have to spend a lot of time catching live bait. The fact is that in the summer it is very difficult to store live bait: it quickly dies in any container, and live bait must always be vigorous. A device made from 2 plastic bottles will help solve this problem:

Take a 2-liter plastic bottle, the neck of which is cut off in half.
After this, the neckline is cut off from the same side at the widest part.
The result is a piece that looks like a watering can.
The bottom of this bottle is cut off.
Take a second bottle and cut off the bottom at a distance of 5-7 cm from the greatest thickness.
Finally, the structure is put together. The cut “watering can” is inserted back, but only in reverse, with the thinnest part inward, after which the structure is firmly connected using artificial threads. Take another bottle and put the cut end on the first bottle with a neck.
A weight and rope are attached to the trap.

After this, you can place bait in the trap and lower the trap to the bottom of the reservoir. A fish that falls into a trap will no longer be able to get out of it. If you need live bait, you just need to pull the trap out of the water. In order for the fry to always be fresh and lively, the trap must be kept in water for an indefinite period of time.

DIY zherlitsa

In winter, the most common tool for catching predators (pike) is girders. It turns out that it can be done quickly and simply:

The basis for its manufacture is a PVC sewer pipe, 32 mm thick. The pipe needs to be cut into pieces 10-15 cm in size.
It is better to file all uneven areas where the cuts are made.
3 holes should be made in the pipe. Two holes are made on one side, one opposite the other, to install on a tripod, and on the other side one hole is made for the line stopper. Its diameter is 1 mm.
A line stopper is formed in the shape of the letter P and threaded through a small hole. The stopper should not limit the free movement of the fishing line.
A ring is formed from a fishing line 0.4-0.5 mm thick, which is passed through two holes located opposite each other. This ring will serve as a kind of fastening. The vent is attached to a metal rod firmly driven into the ice.
About 10 meters of fishing line is wound onto a piece of pipe.
A corresponding weight and a hook, such as a tee, are attached to the end of the fishing line.

The zherlitsa is ready for use at the end of the pipe; red tape should be secured at the point of suspension (attachment), which can serve as a bite indicator.

Making bait for crucian carp

The average crucian carp, which most anglers catch, prefers semolina bait prepared according to a special recipe.

Recipe for making catchable bait for crucian carp:

Pour water into a bowl, add a couple of drops of flavoring, and bring to a boil.
Semolina is poured into boiling water with constant stirring. The result should be a homogeneous thick mass.
The heat is turned off to allow the porridge to cool and steam.
After reaching room temperature, knead the porridge with your hands to obtain even greater density.
After this, the porridge is wrapped in several layers of gauze.
It is not recommended to wrap porridge in plastic.

Balls are molded well from the finished porridge, after which they are placed on a hook.

Recipe for preparing porridge bait using the cold method:

Water is collected from a reservoir into a suitable container and a little flavor is added.
After this, semolina is added to the bowl with vigorous stirring.
As a result of active stirring, a homogeneous mass should be obtained. The readiness of the bait is checked as follows: if you lift the spoon with the porridge up and turn it over, the porridge should remain in the spoon.
Stirring is stopped and the porridge is left for 10 minutes to swell.
Finally, you need to take a syringe and fill it with porridge.

The porridge from the syringe is squeezed onto the hook in a spiral so that the tip of the hook is the last to close.

Feeder made from a plastic bottle

When fishing on a feeder, snags very often occur, and as a result, the loss of an expensive feeder. Many fishermen, for fear of losing their feeder, refuse to fish in promising places. In order not to be afraid of losing it, you need to learn how to make this consumable yourself.

So, a feeder for a feeder made from a plastic bottle:

To make such a feeder, it is advisable to take a green plastic bottle, then cut off the bottom and neck.
The resulting workpiece should be cut into fragments measuring 6x13 cm.
The existing blanks are rolled into a cylinder with an overlap of up to 1 cm and fastened with a stationery stapler.
A piece of sheet lead of a certain mass is attached to the side surface where the feeder is fastened. You need to attach a loop of paper clip to a piece of lead.
Take a soldering iron and make holes in a checkerboard pattern around the entire perimeter of the feeder.
A swivel is inserted into the loop.

The feeder is ready for use. As can be seen from the technology, losing such a feeder will not be so offensive, since its cost is cheap, and they can be made great amount.

Therefore, in order not to spend extra money on fishing, it is better to spend a little time and strain your imagination, especially since there is a sufficient amount of used materials that may well be useful on the farm. In addition, no expensive equipment or tools are required; a simple set in the form of a soldering iron and a stapler is sufficient. As practice shows, the result will always be the same, and the costs will be an order of magnitude less.

fishingday.org

Classification

Existing today fishing tricks and homemade products can be divided into several categories, each of which is distinguished by its practical application. The first of them contains various gear. These can be products that successfully copy foreign analogues, the cost of which is simply fabulous, or real inventions of fishing enthusiasts. This group includes floats and hooks, leashes and spoons, donks, jigs and much more.

In the second category there are fishing tricks and homemade products that have already been sufficiently tested by experience. This also includes complementary foods, various types of baits and attachments, as well as invented fishing methods and methods. This is a fairly large topic in which questions are discussed about how to fish in one place or another and at one time or another of the year.

The third, quite extensive group includes various accessories - either invented or copied from existing samples. They represent a variety of devices that allow:

Increase the shelf life of fish in hot weather; - dress properly so as not to freeze on the ice in winter;

Save bloodworms and other bait by placing them in special containers.

So, what are the most popular fishing tricks and homemade products that are made from scrap materials?

Toothbrush poppers

Very often, fishing tricks and homemade products literally amaze you with the imagination of the craftsman who made them. This surface bait from a foreign manufacturer can be quite expensive. That is why it makes sense to make it yourself. Poppers, also called walkers, being surface baits, should not sink. Only their slight submersion is permissible. What material can be used that will float well on water? These are toothbrushes that are primarily tested for buoyancy. This is quite easy to do. It is enough to fill an ordinary bucket with water and throw a brush in it. It must float on the surface and not sink.

The work is done using a small grinder with replaceable attachments, which looks like a micro-grinder. Making this clever fishing tackle begins with sawing off the part with bristles from the brush. The resulting edge should be processed with a sandpaper attachment. You will need to make a small hole in the top and bottom. It is necessary for fastening the tee with a ring with a swivel. Further homemade bait needs to be repainted. The colors must be bright, for example, green and red. Tees are inserted into the almost finished product. If you test the resulting structure in the bathroom, you will find that due to its heavy weight it is pulled to the bottom. A narrow strip of foam glued on top with superglue will help avoid this. In this option, the popper will float well on the water and will stop sinking.

Wobblers

In a fisherman's workshop, homemade fishing tricks can be made from a variety of materials. However, for wobblers it is best to take birch. This tree is perfectly processed and does not splinter during work. At the first stage of manufacturing the future bait, its body is sharpened using a cutter. After this, the resulting workpiece is processed first with coarse and then with fine sandpaper. In this case, the wobbler will be smooth and will not have any burrs.

The product will require fastening loops, which can be made from cornice string. The wire is bent in the form of a slightly twisted letter “P” (to hold better). In addition, for strength, one end of the letter should be slightly longer than the other. Next, the bracket is driven into the wobbler. To do this, use “nails” cut from wire of the same diameter.

The wobbler must have a certain weight. That is why it is surrounded by inserting a small tin plate into a cut out triangular depression in the abdomen.

At the next stage, the wobblers are painted using gouache. In the most critical places, it is advisable to use a gel pen, which will give the color clarity. After this, the bait should be coated with varnish in 2-3 layers.

Lastly, the blade is inserted. It can be made from unnecessary computer disks with paint removed from one side using a needle. Next, a cut is made in the disk using a hand jigsaw and the part is inserted into the wobbler.

Spinner for pike perch

Fishing tricks and homemade products for fishing can be made from anything. Sometimes even broken tweezers are used for this. This tool itself is of high quality and is made of stainless steel. That is why it can serve as an excellent lure for pike perch. As you know, this fish is a predator characterized by a narrow throat. So the spinner also needs to be narrow. Tweezers are just perfect in this case. From one leg of this cosmetic instrument you will need to cut a piece of the required length. It is sanded a little. This allows you to give the part the desired shape and rid it of small burrs.

The next stage of work is drilling the holes. They are needed to attach the fishing line and tee using swivels and rings. It is worth keeping in mind that this procedure is not easy. The selected material is quite durable, and a thin drill may even break during operation.

At the end of this stage, the threesome is screwed on. It is better to do this from the heaviest side, otherwise the spoon will not hold well in the water. For those who wish to give their product an aesthetic appearance, it is recommended to cut scales on it. This piece of tweezers already has transverse layers. All that remains is to make a few longitudinal, even cuts and the shiny lure for perch or pike perch will be completely ready for fishing. It is worth noting that such homemade products are no worse than branded ones. And the one made from tweezers can even be called the best. After all, in it the tee is located on the heaviest side, which allows you to avoid spinner overturns and overlaps.

Summer trifles

There are many fishing tricks and a huge number of homemade products have been invented that are used not only by beginners, but also by experienced fishermen in the warm season. Summer fishing has its own specifics. During this process, special attention is required to preserve the catch. After all, fish quickly deteriorates in hot weather, and by evening you may just have to throw it away.

Saving what is caught

After the fish has been pulled out of the water onto the shore, it should be carefully (so as not to squeeze the insides) removed from the hook. And if the catch was severely injured, then it should not be placed in a bucket with the rest of the catch. Such actions will lead to the fact that within a few hours all the fish will spoil in the heat.

Wounded prey should be killed and gutted, and then wrapped in fresh grass (preferably nettles). It is better to store such fish in the shade, where it will be blown by the breeze and be cool. If there is no such place nearby, then the gutted prey should simply be salted.

Live storage

For many fishermen, bringing home a live catch is important. To do this, the fish must be stored in water, while being in a kukan or in a cage. The mesh of the latter should not be metal, since the prey will attempt to get out into the reservoir, which will lead to severe injury. You need to hang the cage in the shade, deepening it into the water enough to allow the fish not to bump into each other when swimming. In addition, in cramped conditions, the catch is in danger of self-poisoning with products released as a result of metabolism.

Homemade fish tank

This fishing item is offered by all specialized stores. However, if the cage is branded, then the price for it is set such that not every fisherman can afford to purchase it.

For the summer season, this accessory can be made independently. At the same time, it will be quite wide, long, and, if desired, foldable.

How to make this fishing homemade product? To do this you need to take a strong wire. You can use ready-made metal rings. To create a compact tackle, you will need three of them at once, but with different diameters - large, medium and small. You will also need a nylon mesh. The one that was previously used for windows as protection against mosquitoes will come in handy. A product similar to a sock is sewn from such a mesh. It must match the diameter of the rings. They need to put on such a sock and attach it with small stitches. To keep the fish in the cage you will also need a lid. It is made from a nylon mesh stretched over another wire ring. To secure the entire structure, the fisherman must use small tricks. They consist of using a nylon rope tied to the structure with a secure knot. Otherwise, the fish tank with its catch may float away with the flow. And to prevent the prey from going to the bottom, you can attach a small children's lifebuoy to the upper ring.

DIY floats

Fishermen like to make this small device, which signals a bite, with their own hands. First of all, because there is no point in buying something that you can do yourself. In addition, DIY fishing crafts and tricks are a hobby for many water hunting enthusiasts. And this does not mean that buying a float in a store is impossible due to its high cost. Many fishermen can afford to purchase the best that a modern manufacturer offers. However, the peculiarity of fishing tricks and gear made at home is that they are sometimes the most suitable option for successful fishing.

For many fishermen, homemade floats are much better than store-bought ones. After all, they can be made in any shape and painted in the most pleasing color to the eye. And making this gear is quite simple. Just keep in mind that the first products are unlikely to be ideal. But then, as they gain experience, each fisherman will be able to refine their crafts, as well as come up with different and the most unusual options for floats.

Similar gear made from goose feathers is good. This material is easy to find in any body of water that these birds prefer. The feathers they have lost sometimes simply float on the surface of the water. All you have to do is bend down and pick up this unique natural material.

Hand-made floats can be of different sizes. Large ones are for larger fish, and vice versa. You will need to cut off everything unnecessary from the feather, leaving only its base. As a result, only a light, thin, but at the same time quite strong stick will remain in your hands. Everything unnecessary should also be cut off from its upper side. From below, that is, in the place where the feather should be attached to the skin of the bird, you cannot touch it. Otherwise, the resulting float will constantly get wet. To perform these works, which will allow you to make the main part of the float, you will need a sharp stationery knife. After completion of the work, the product is painted in bright colors, which will allow it to be much more noticeable on the water. It's easier to do this with nail polish that is water-resistant. The cut part of the float provides a fastening for fishing line.

Fishing for crucian carp

This fish is one of the most popular among professionals and beginner fishing enthusiasts, as it lives in almost every body of water. You can ensure yourself a successful time with a fishing rod if you use a few tricks for catching crucian carp.

And you should start with complementary foods. It is worth keeping in mind that crucian carp are very sensitive to odors. That is why he does not always respond to the complementary foods offered by specialized stores. A little trick for anglers when catching crucian carp is to use regular feed, to which pre-ground roasted seeds have been added. This mixture is pre-wetted. This allows it to settle to the bottom of the reservoir. Crucian carp do not bite very actively when using regular dough with grain flour. To correct the situation, you can add a little valerian tincture to complementary foods.

One of the unusual ways to get an excellent catch is to singe the hooves of cattle over a fire. While still smoking, they are thrown into the water, which contributes to an excellent bite.

There are other fishing tricks and homemade products for crucian carp. So, for a good catch, so-called spring nipples are often used. This type of tackle is designed for the fact that crucian carp likes to suck food from the bottom into its mouth. That is why hooks are taken on short leashes and then hidden in bait located in feeders made from bottle caps, as well as from wire twisted into a spring with a concave lead plate. During feeding, the crucian carp swallows the bait, and with it the hooks.

In the cold season

There are also winter fishing tricks and homemade products. They make fishing easier and create a certain comfort when a person is in difficult weather conditions. One of the accessories that is not at all difficult to make with your own hands is a gaff. For it you will need a handle from an old umbrella and a sharpened metal rod. You can take an electrode from which the insulating layer has previously been knocked off. One end of such a metal rod should be sharpened and bent into the shape of a hook, and the other should be flattened on an anvil. You will also need a plastic dowel for the hook. It is put on the rod, sliding it to its flattened part. Next, the dowel is inserted into the umbrella tube. It is fixed to it by flattening.

Many fishing tricks and homemade products for winter fishing protect a person with a fishing rod from various kinds of dangers. So, every fisherman moving on ice needs to carry so-called life preservers. These are two wooden handles turned on a lathe, in each of which a sharpened steel pin is fixed using epoxy glue. These parts are connected to each other with a rope, the length of which is 30-50 cm less than the height of the fisherman. “Rescue bags” are worn around the neck. If a fisherman falls through the ice, he must stick the pins into the edge near the water and climb up, standing on the rope as a step.

Many fishing tricks and homemade products, the ideas of which are presented above, have been actively used by anglers in many countries for decades.

www.syl.ru

DIY fishing crafts, tackle and equipment for fishing with your own hands. Website of Novosibirsk fishermen

Sort by: by date by comments by rating

When fishing in winter, everyone is faced with the problem of protecting the hole from wind and drifting snow. You can climb into a tent, but then fishing becomes less mobile. You try to block the hole with your boot...

Hello. I think every fisherman comes to a point in his career when he wants to make something with his own hands (baits). So I decided to try my hand at this aspect of creativity. On...

To make a rack for spinning rods we will need: 1 Plywood boards (trash) 2 Screwdriver 3 Drill 4 Some kind of thing for 30 mm 5 Self-tapping screws 6 Saw 7 Pencil 8 Tape measure 9 Hands are not from the ass It seems to me...

I decided to make a landing net for my husband. For this we need: 1 PVC pipe 2 Electrical tape 3 Nylon threads. 4 Net 5 ax 6 scissors Take and bend a pipe like a racket; the excess can be cut off with an ax or...

Hi all! I want to tell you about such interesting equipment as microturbines. To make it you will need: a leash - string number 1 or just string number 1, tees or various...

Hi all! I often fish on UL when entering the water. It was very inconvenient to change baits. I didn’t want to buy a bag with a holder, since it is more massive than the one I took for a small set...

Why did I decide to make it myself and not buy it? At least the same Chinese one, which is sold in almost every fishing store, I don’t know. Maybe it’s because it’s more convenient than a cage, it doesn’t take up much...

Obamazoid is my pride. This is a true spinning streamer because any spinner can make it without any fly tying tools. And he catches fish no worse than store-bought ones...

I have long set out to make a hook that would be lightweight and fit in a winter box. Before that, there were long hooks - you had to attach them to a drill, which is not very convenient. It’s also not possible to buy store-bought ones...

←previousnext→

www.fishingsib.ru

Fishing crafts for summer fishing - how to make them yourself

Spoons are generally divided into types according to different principles - you can look at them by season, and then it turns out that there are winter and summer spoons. If you divide by catch, then the species will be as follows - perch, pike, etc. You can also use the operating principle as a basis for dividing into types - oscillating, rotating and others.

An oscillating spoon is well suited for summer fishing - it is a metal plate, which, thanks to its design, can make movements in a certain rhythm, which attracts fish.

Feeders

Fish feeders have been made for many years - with the development of technology, more and more new types are appearing, and they are constantly being improved. The advantage of feeders is that you can cast them quite far, thus counting on large fish, as well as a good result and the absence of a snag.

Today, feeder feeders and carp feeders are made - the former are much more universal, and the latter are used mainly for carp, since they are larger.

You can also divide feeders into types according to shape - square, oval, spring, etc. The choice is wide - the main thing is to decide in advance where the feeders will be used.

In addition, they are made open and closed - the latter are suitable for animal feed, and the former for vegetable and cereals.

A metal feeder is more difficult to make and requires a lot of materials and tools.

Floats

To make a float at home, you need to have some equipment and materials. It is best to make floats in several pieces - it just saves time.

So, one float shape can be made in different sizes. You need to make a blank with a jigsaw or knife.

It is best to leave a length margin of a centimeter or one and a half, and a thickness of 3-4 mm.

To find the center, draw diagonals at the ends. For the keel, steel wire is used, which must be tinned.

In the center at the end you need to insert the keel a centimeter, maybe one and a half.

Mugs

Fishing mugs are used for catching predatory fish - they are made from a disk, a stick and equipment, which, in turn, consists of a line, a weight and a leash (for pike), as well as a tee.

The bottom side of the disk should be painted white, and the top side red. The mast should be made of coniferous wood in the form of a truncated cone.

It will be fifteen centimeters long, with a diameter of 6 to 12 mm from top to butt.

Since coniferous trees are quite soft, no equipment is needed - just a simple knife.

The keel head is more difficult - you need a lathe here, since its shape should be like that of an egg.

If all the work is done on a machine, then the mast will generally be smooth and even.

A blind hole is made in the keel head, which is necessary to insert the mast head there - for good fastening, it is filled with epoxy resin. The last thing left is to equip the circle.

It is better to make the main line from a nylon cord with a cross-section of half a millimeter. The length is determined individually - several meters longer than the deepest place in the intended fishing spot.

Fishing rods

It is much more difficult to make a spinning rod yourself, but it is generally a professional device for fishing. The fishing rod here is made of cork or wood, but plastic can also be used.

Snaps

Today there are many baits, and even more types of equipment.

The classic equipment is a weight-head and a hook soldered into it. The weight can be of different shapes - a ball or an ellipse, a rugby or a hoof.

Hinged mounting means that there are two fastenings on the weight - one for the main line and hook, and the other for the offset hook and bait.

Making one with your own hands is only a little more difficult than classic equipment - you just need to solder an additional fastener.

I have been active fishing for quite some time and have found many ways to improve the bite. And here are the most effective:

Bite activator. Attracts fish in cold and warm water with the help of pheromones included in the composition and stimulates its appetite. It’s a pity that Rosprirodnadzor wants to impose a ban on its sale.
More sensitive gear. Reviews and instructions for other types of gear can be found on the pages of my website.
Lures using pheromones.

You can get the rest of the secrets of successful fishing for free by reading my other materials on the site.

Nods

First, you need to cut a thin sliver from the knee of the telescopic rod - the length should be at least 15 cm. The sliver must be cleaned and sanded with sandpaper.

Afterwards, a ring is made from the wire with one end several centimeters in length - the end should extend from the ring at a right angle.

In addition, you can put a heat tube on the nod and melt it - this way there is no need to paint it, and also test for flexibility.

Homemade boats

The materials you will need are ash and five-millimeter plywood. First you need to make the frames and keel.

The assembly of the frame ends with the fastening of two more slats - not screws to the right and left of the longitudinal one.

The next stage involves turning the boat over on the trestles. The frames are processed with a rasp so that they fit snugly against the curved rail being pressed.

The skin pieces are cut out of plywood and attached to the boat using a generous amount of epoxy glue.

Afterwards, the fastening of the remaining parts begins - the upper strips, the rear part of the boat, fenders, seat supports, breshtuk, brackets, etc.

Fishing knots

In the process of fishing, many types of fishing knots are used - and all of them are divided into categories according to their intended purpose. For example, there are knots for hooks and lures, loops, for attaching fishing line to a reel and for tying fishing lines.

For a spatula hook that does not have a knot, a basic fisherman's knot is usually used. For large hooks, use the Dumhof knot. The leash knot is convenient because it does not damage the fishing line.

Many fishermen also use stopper knots to limit the depth of a sliding cast or to control casting distance.

Production of mesh fabric. How to knit a net?

If earlier nets were made from vegetable ropes, now they are mainly nylon, perlon or thick nylon threads - they are not only stronger and do not rot, but also show much better performance in terms of catch.

Delhi is knitted on a shuttle - you need to prepare enough thread in advance and wind it on the shuttle. Winding is done using a certain technology - you need to wrap a thread around the inner peg, the fork at the end, and then the peg on the other side.

You also need a thin plate of wood - the width of such a shelf depends on the size of the cells you need. The finished meshes are hung on a nail so that the knot on them is between the left end of the mesh and the nail.

To connect the pieces, you need to hang them on the nails with the outer cells, and connect them in the places where they should be connected more carefully, and in this method you need to tie the rope alternately to one and the other edge, just like when knitting a net.

Homemade sprays for summer fishing

You can also combine different scents - for example, by mixing strawberry essence, vanilla and cocoa in water, you need to bring the container to a boil, and then pour it into bottles.

When fishing, it is best to take several types of sprays - who knows what kind of fish will go today? For crucian carp, for example, it is best to use sunflower oil and garlic.

For many fans, fishing is not even a hobby, but a way of life to which they are ready and even devote all their free time.

And therefore, very often, avid fishermen have to invent and make various baits, spoons, tackles and much more themselves.

DIY silicone baits

It is often a pity to part with a vibrating tail that has already served its purpose. Or would like to add some element to it that you think is quite necessary. It doesn’t matter, you can make a new silicone bait at home.

Manufacturing:

In a used canning jar, cleanly washed, of a suitable size, we dilute the plaster to the state of thick “bazaar” sour cream and dip old vibrating tails into it halfway to obtain a template. After the solution has hardened, carefully remove them. If you want to make changes to the shape of future products, use a sharp knife to add the necessary touches before pouring the silicone.
Lubricate the finished cleaned form generously with fat, The most suitable option is sunflower oil, so that the finished products are damaged when taken out and do not stick to the mold.
All further steps of pouring silicone into molds must be done in the open air. he or in a well-ventilated area.
We cut old unused silicone products into pieces and place them in a jar that is heated on the stove.. To prevent the silicone from burning, it must be stirred. Keep the fire at a distance of 15-20 cm from the heated container. To obtain silicones of various colors, food coloring is added to it and, if desired, you can drop a little of a special fish flavor purchased at a fishing store.
The heated and thoroughly mixed silicone mass is poured into the mold starting from the thinnest point. If you are making a two-color bait, then the layer of the second color is poured only after the first has dried.
After complete hardening (usually 15-20 minutes), the bait is carefully removed from the plaster mold We. We clean the mold from silicone residues, correct the oil layer and repeat the process.

Mini clasp for quick DIY attachment changes

Very often when fishing, especially fly fishing or lure fishing, there is a need to quickly change the nozzle. For this purpose, a specially shaped mini-clasp was invented. It is quite simple and easy to make at home.

Manufacturing:

Tools needed to create a mini clasp:

Wire cutters.
Small round nose pliers and pliers.
Tweezers.

A thin, rigid wire is used as the base material.. An acceptable option is a large staple from a regular stapler.
We bend it with pliers into a product according to the shape, resembling a paper clip, but reduced in size by half.
We bite off the excess wire.
We select the size of the camber rick (hard silicone tube) of such a size that it fits tightly around the fabricated fastener.
Using wire cutters, bite off a piece of the tube slightly longer than the fastener, it will act as a retainer.
We thread the resulting piece of tube onto a fishing line and firmly fix it with a knot.
Insert the attachment you need into the other side of the fastener.
Pulls the silicone cambric with force. That's it, the mini clasp is ready.

Feeder for feeding fish from a boat

If you prefer to fish from a boat, then you will definitely be intrigued by this very simple and inexpensive fish feeder. It will serve as an excellent replacement for casting bait by hand, especially if fishing is in the current.

To make it you will need:

a piece of sewer plastic pipe;
two plugs for it;
lead;
electric drill;
rope, rivets;
loop and lock.

A piece of pipe about 30 cm long is fitted with plugs on both sides, one firmly and tightly, the other like a window in a house on a hinge.

We drill holes along the entire surface of the feeder.

A rope is connected to the opening lid, and a lock is attached to it from the inside. Weights are installed outside the pipe near the cover.

The feeder, pre-filled with bait, is carefully lowered into the selected fishing spot with the lid down due to the weights attached to it, and with a slight tug of the rope the unwanted spot is emptied. The whole place is baited and you can fish.

Wobbler from a home workshop

Store-bought wobblers are certainly not bad: very colorful, streamlined, completely imitating a small fish and its movements in the water, but they have one big drawback - the high price.

Therefore, many people prefer to make them themselves at home, especially since the process itself does not require special equipment and is quite exciting in itself.

Making wobblers:

First of all, we draw on paper a sketch of what we want to do. Regardless of the material used to make the wobbler, it must be made of two symmetrical halves to pass a steel wire amplifier inside it.
Wobblers can be made from foam plastic. It is easy to process, but less durable than plastic or wood. Having decided on the material, we cut out the blanks.
We make fastenings for rings and tee hooks from thin stainless wire, we install them in the grooves cut in advance in the halves of the wobbler body, and fasten them with glue. After the glue has dried, we make a cut for the front blade and secure it firmly with glue.
Then we ship the wobbler. There are many options here - everyone does this procedure specifically based on their personal preferences. That is, we customize it for ourselves.
Fill the remaining empty spaces on the surface of the wobbler with epoxy resin and grind. You can now begin the creative process of priming and then painting the wobbler. There is nothing holding back your imagination here.

DIY spinner

Making a spinner with your own hands is not at all difficult with some skill. An example is a spinner.

For this you will need:

regular paper clip;
hook tee;
metal plate 0.5 - 1 mm (can be taken from an empty tin can);
small bead;
a piece of sheet lead;
tools: pliers, file, scissors, needle files.

We cut out the shape of the petal itself from cardboard and transfer it to metal. Carefully cut along the contour and remove burrs along the edges with a file.

We drill two holes along the edges and process them with a file.

We bend the places with holes at an angle of 90° relative to the petal.

We make an axle out of wire with a ring and a loop at one end, where we attach the tee hook.

We thread a petal through the other end, then a bead, and at the end we make a loop for the fishing line at a distance so that the lead sinker does not interfere with the free rotation of the petal.

The spoon is loaded experimentally on a reservoir by attaching weights to the niche between the petal and the tee. And the final touch is the coloring of the spinner.

Homemade products for summer fishing

When fishing, the problem of using live bait for bait often arises. Catching it usually involves wasting time. In hot weather, baitfish quickly become lethargic in a bucket of water and die.

A very simple device made from two plastic bottles will help you solve this problem:

Cut off the neck of a two-liter plastic bottle by half.
Then, on the same side, cut off the neck of the bottle at the widest part.
You have a truncated cone, somewhat reminiscent of a watering can.
We cut off the bottom of it.
For the second bottle, cut off the bottom 5-7 cm from the point where the largest diameter appears.
We connect the structure together. We insert the neck at the place of the cut, but on the contrary with a small hole inward and firmly fasten it with threads and a needle. We tightly place the bottom from another bottle onto the cut off bottom according to the principle of a drawing tube.
We attach a small sinker in the middle of the side of the bottle, and a rope on the opposite side.

That's it, the trap is ready. We throw bread crumbs inside and throw a trap near the shore. The fry, having swam for food, can no longer get out of there on their own.

All that remains, when you need live bait, is to pull the trap out of the water and, by removing the plug at the bottom, get fresh and vigorous live bait.

How to catch more fish?

I have been active fishing for quite some time and have found many ways to improve the bite. And here are the most effective:

. Attracts fish in cold and warm water with the help of pheromones included in the composition and stimulates its appetite. It’s a pity that Rosprirodnadzor wants to impose a ban on its sale.
More sensitive gear. Reviews and instructions for other types of gear can be found on the pages of my website.
Lures using pheromones.

You can get the rest of the secrets of successful fishing for free by reading my other materials on the site.

Homemade products for winter fishing

In winter, live bait is often used to catch predators.

An example of such a budget and quickly manufactured gear:

Material for production – sewer PVC pipe with a diameter of 32 mm. We cut the pipe into pieces of 10 - 15 cm.
We process the chamfers at the ends of the pipe with a file.
Using a heated nail, burn 3 holes in the tube. Two on one side, opposite each other, for hanging it on a tripod and one with a diameter of 1 mm on the other side, for stopping the fishing line.
We make a line stopper in the shape of the letter P and thread it through a small hole. It should not interfere with the free movement of the fishing line.
We make a ring (suspension) from a thick 0.4-0.5 mm fishing line, passing it through two holes on a plastic pipe. The suspension is used to attach the pole to a rod firmly driven into the ice, so that an overly frisky fish does not drag your pole under the ice.
We wind up to 10 meters of main fishing line onto the pipe.
At the end we put an olive weight and a tee hook on a double loop.

That's it, the girder is ready for work.

Tip: wrap the end of the pipe near the suspension loop with red tape and then the disappearance of the girder will be visible from afar, and you will always have time to get to it in case of a bite.

Homemade products for do-it-yourself fishing for crucian carp

There is one bait that crucian carp, especially not very large ones, prefer over all others. This is ordinary semolina porridge, but prepared in a special way.

Semolina bait recipe (hot):

pour water into a saucepan, add a couple of drops of flavoring and bring the mixture to a boil;
pour the cereal into a saucepan in a thin stream, stirring continuously until a homogeneous thick mass is obtained;
turn off the heat and leave the porridge to cool and steam;
when it reaches an acceptable temperature, knead it thoroughly with your hands to achieve even greater density;
to minimize drying of the porridge, wrap it in several layers of gauze;
You can’t wrap porridge in plastic; it suffocates and turns sour very quickly.

This kind of porridge makes good balls for bait on a hook.

Semolina bait recipe (cold):

pour water from a reservoir into a tin can, drip a little flavoring;
stirring constantly, add semolina there;
We continue the process until a homogeneous mass is formed. The density is checked as follows: raise the spoon with the porridge above the jar, if it remains on the spoon and does not fall down, the porridge is ready;
set the porridge aside for 10 minutes to swell;
We take a pre-prepared syringe and fill it with the mixture.

The bait is squeezed out of the syringe onto the hook and wrapped around it in a circle, the hook tip being closed last.

DIY fishing crafts for feeder

When feeder fishing, the feeder is a consumable item. It breaks while casting, it gets snagged and a new feeder is needed. In order not to constantly buy new ones, you can make them yourself from scrap materials.

Feeder made from a plastic bottle:

We take an ordinary plastic bottle (preferably green), cut off its neck and bottom.
We mark the resulting plastic and then cut it with scissors into rectangles measuring 6*13 cm.
We roll the finished pieces into a cylinder with an overlap of 1 cm and fix them with a stationery stapler.
On the side surface of the feeder we attach a piece of sheet lead with a loop made of a regular paper clip attached to it.
Using a heated small soldering iron, we burn holes in the feeder in a checkerboard pattern at a distance of 2 cm from each other.
Insert a swivel into the resulting loop.

That's it, the feeder is ready, you can start fishing.

As you probably already understood yourself, there is nothing complicated in making additional homemade fishing devices and, for the most part, they do not require any specific skills or expensive machines for their production.

Therefore, do not be afraid of this, act boldly, invent little things yourself that can simplify the process of fishing or increase the catchability of the gear, and simply while away the long winter evenings.

How long has it been since you had a really BIG CATCH?

When was the last time you caught dozens of HUGE pike/carp/bream?

We always want to get results from fishing - to catch not three perch, but ten kilogram pikes - what a catch! Each of us dreams of this, but not everyone can do it.

A good catch can be achieved (and we know this) thanks to good bait.

You know that disappointment when you buy bait or prepare it at home and only catch three or four bass?

So maybe it’s time to use a truly working product, the effectiveness of which has been proven both scientifically and in practice on the rivers and ponds of Russia?

Of course, it is better to try once than to hear a thousand times. Moreover, now is the season! This is a great bonus when ordering!

Find out more about the bait!

Just give our craftsmen from the people a reason to make something. A special article is fishing tricks and homemade products. Firstly, they performed (and sometimes continue to perform) purely practical functions in an era of total shortage of fishing goods. Now you have wobblers, twisters, bloodworms, and telescopic fishing rods - all sorts of good stuff in bulk (though not always of high quality, but serious companies will ruin you). But I remember there was a time when even a standing hook or a Klin fishing line - during the day with fire. So the fishing people did their best. And I must say, he did it quite well and with high quality, and most importantly, functionally.

Attempt at classification

All fishing tricks and homemade products can probably be divided into several large categories in the context of their practical application. Firstly, these are all kinds of gear, either copying (with invariable success) foreign fabulous analogues, or real inventions, which, in turn, were copied without a twinge of conscience by Western manufacturing companies (since, naturally, none of the fishermen received a patent ). This broad group includes hooks, floats, spoons, leashes, jigs, donks and much more. Secondly, fishing tricks and homemade products are proven by experience and even invented methods and methods of fishing, feeding, types of attachments and baits. This all applies to big topic: exactly how to fish in different places and at different times of the year.

Accessories

The third large group includes fishing accessories, invented or copied from existing samples. These are all sorts of devices for longer storage of fish during summer fishing, winter subtleties in terms of equipment on ice, used to avoid freezing, containers for storing bloodworms and other baits. All of them, with rare exceptions, are a real storehouse of folk wisdom, a book of fishing luck. So, for your attention - a small hit parade of homemade products, made from what the fishermen themselves came across.

Toothbrush poppers

Fishing tricks and homemade products sometimes amaze you with a play of fantasy. Since newfangled imported things are quite expensive, it clearly makes logical sense to make them yourself. Poppers or walkers are surface baits and should not sink. A little submersion is allowed, but still, the material should float quite well on the water. Therefore, first you need to check toothbrushes for buoyancy. This can be done by collecting water in an ordinary bucket and throwing a brush into it. If it doesn’t sink, but floats on the surface, then that’s it. We carry out the work with a small grinder, reminiscent of a micro-grinder, with removable attachments. We saw off the part with the bristles. We process the edge with a sandpaper attachment. In the lower and upper parts it is necessary to make a hole for attaching the lower tee (attached using a ring with a swivel). We tint the homemade bait (in this case, you can choose red and green - bright colors). We insert the tees. A test in a water bath shows that the weight of the tees is sufficient to sink the structure. To prevent this from happening, glue a narrow strip cut from foam onto the top of the nozzle with superglue. Now the popper does not sink and floats well on the water.

Wobblers

If we are making a wobbler, then we also cut in an additional blade in front of the structure (it can be made from a plastic bottle cap by cutting out a small part). You can paint it with bright nail polish borrowed from your wife. You can also insert an additional weight for weighting. But in our case, the design turned out to be of quite the required weight, and flies far when casting. This is how simple toothbrushes can serve as the starting material for spinning baits.

Spinner for pike perch from broken tweezers

Fishing crafts are sometimes made from anything. But even from broken tweezers. The tool is of high quality (it was once), made of good stainless steel. Why not use a spinner for pike perch? As you know, these predators have a rather narrow throat, and you don’t need a wide spoon either - it’ll do just fine! So, from one leg of the tweezers we cut the workpiece to the required length. We sand it a little, giving it shape and getting rid of small burrs. Now we drill holes where the tee and fishing line will be connected using rings and swivels. This procedure is not so easy to carry out: you can even break a thin drill, since the material is quite durable. Well, it's done. We screw on the tee (preferably on the heavier side, so the spoon will stay more stable in the water column). For aesthetes: you can cut the scales with the same grinder (there are already transverse layers there from the tweezers) - just make a couple of even cuts along the length, and the scaly shiny lure for pike perch or pike perch is ready for use. Such homemade products for fishermen are practically no different from the notorious branded ones. This one turned out even better: the analogue has a tee on the less heavy side, which leads to overlaps and overturning of the spoon.

Fishing trifles in summer

Homemade products for fishing in the warm season can be very useful for both beginners and experienced fishermen. Summer fishing has its own specifics. Great attention should be paid to preserving the catch, since in the heat the fish can spoil very quickly. And a catch caught in the morning, without proper preservation (and in the field, rarely does anyone have a freezer box - except perhaps some car enthusiasts) may simply not survive until the evening.

How to save what you catch

After fishing and pulling the fish ashore, carefully, without squeezing the insides, we release it from the hook (otherwise it will quickly fade). You should also not throw severely injured fish into a bucket with the rest of the caught ones - it can ruin the entire catch in a few hours in the heat. Wounded prey is best killed, gills removed and gutted. Next, wrap it in fresh grass ( the best option- nettle) and store in the shade, preferably where there is coolness and breeze.
Gutted and gill-free fish can also be salted before storing.

Live storage

If you intend to bring home live prey, you need to store it in water, in a cage or on a kukan (a kukan is well suited for underwater sea hunting, for example). And the cage should have fairly wide rings, the mesh should be made of fabric, not metal. The fish will be seriously injured when trying to escape from the metal. You need to hang it, immersing it in water, in the shade. So that the fish can swim calmly and not hit each other. In a cramped cage there is also a high risk of self-poisoning of the catch with metabolic products.

Homemade cage

More about fishing homemade products. A good branded fish tank is quite expensive - not every angler can afford such luxury. But a cage for storing catch in the summer, long and wide enough (and, importantly, foldable) can be made independently. To do this, we will need strong steel wire or ready-made rings made from it. If you need a compact device, take three rings of descending sizes. Medium is in the middle, small is at the top. You will also need a nylon mesh (the kind that was used for windows against mosquitoes before the widespread installation of metal-plastic ones). We sew a sock from the mesh according to the size of the rings. We put it on and sew it tightly to the rings with stitches. We make sure that the cage is uniform and neat. To prevent the fish from jumping out of the cage, you also need a lid. It can be made from another ring of wire with a mesh stretched over it. Little tricks for the fisherman: our homemade fishnet is attached using a strong nylon rope, which must be tied in a knot to the structure so that it does not float away with the catch, for example. And to prevent your homemade fish tank from flooding if you fish at great depths, you can put a children’s life ring on top of it, as in the photo. Please note that the cage is easy to fold and transport when moving to the fishing spot on foot.

Sensitive float

Let's make fishing tackle with our own hands. Of course, in a store or on the market there is a great variety of floats of different colors and sizes. But choosing a good one is worth it good money. And if you are a fan of fishing float rods, you need to purchase a dozen floats. And many fishermen prefer to make floats with their own hands the old fashioned way. These tackles are made very well from goose feathers. Where there is a lake or pond or river, these birds are sure to graze. And sometimes they lose their feathers. So all that remains is to bend down and pick it up. You can make large floats and small ones (depending on the size of the feather). We cut off everything unnecessary, leaving only the base of the pen. The result is such a thin stick, light and quite durable. We measure the size of the product. We cut off the unnecessary from the top side (from below, in the place where the feather was attached to the bird’s skin, the structure should have its original appearance, the opposite will lead to the float getting wet). It is convenient to carry out the work with a sharp stationery knife. In principle, the main part is completed. We paint the float in bright colors so that it can be seen on the water. The easiest way to do this is with nail polish, which comes in a variety of fairly bright colors. In addition, the varnish is waterproof. We attach a mount to the cut part of the float where the fishing line will be threaded. You can go fishing. But before that, here are two or three more little tricks for successful fishing.

How to balance a float at home

Often, upon arrival at the float rods, poor balancing of the floats interferes (they are carried away by the current or they lie down for no apparent reason). But on the spot, especially in rainy or windy weather, you don’t want to do this, but you have to. Therefore, the most correct solution is to balance the floats in advance, at home. This can be done by taking a full bath of water and uncovering your gear. So, we tie the float to the fishing line (or attach it to a mount) and begin the process of selecting sinkers. The float should not lift the sinker from the bottom. But the load should not be too heavy, as small bites will not be visible. We find experimentally the golden mean (a lead weight that is too heavy can be cut well with metal scissors, and if it is too small, add another piece of lead). The float in the bathroom should stand clearly, almost vertically, without lifting the sinker from the bottom, but also without lying on its side. Now your fishing crafts are well balanced and you won’t have to do this outdoors. This is especially important in adverse weather conditions.

Fishing crafts: tube for storing floats

For removable floats - one of the most important parts of the tackle. However, some of them are quite fragile and can break when the fisherman moves from place to place. To prevent this from happening, we will make a tube for storing floats with our own hands. We take the base from Tuba, which is very durable. Even if you accidentally step on it, it will not break like plastic, and your floats will be intact. You also need a piece of loose foam about 2 cm thick. Two plugs need to be cut out of it. We make an imprint of the film reel on the foam and cut it out with a stationery knife. One plug should fit very tightly into the hole in the tube. To do this, you can glue it, or use the second one - it acts as a lid. We use a stuck paperclip as a handle for easy removal. The floats are attached from the inside with keels to the foam, securing them well. And the lid on the other side closes. And in order to prevent the cardboard from getting wet, for example, in the rain, you need to additionally wrap the structure around the circumference with tape.

Fishing crafts - a treasure trove of fishing experience

Many generations of amateur fishermen pass on their secrets to each other. And today, despite the abundance of products offered for fishing, someone still needs these fishing tricks. Of course, no one can know everything about fishing. But the above and other tips, we hope, will be useful to both beginners and more experienced fishermen. Happy fishing everyone!

It might be useful to read: